Results 1 to 4 of 4
Thread: Decks
-
28th October 2007, 08:58 AM #1New Member
- Join Date
- Oct 2007
- Location
- Brisbane
- Posts
- 2
Decks
Hello. I am going to be building a deck and the the soil that it will be going on is rated 'H class' (Highly reactive). At this stage I am planning to have the stump holes 600mm deep and 300mm wide with the posts 1500mm x 1200mm apart. The deck height above the ground will range from 300mm to 500mm and the span will be 8m x 5.5m. Is the stump depth and spacing sufficient for the 'H class' soil?
-
29th October 2007, 11:39 PM #2
gday r kenny,
what size & type of timber are your posts, bearers, joists & decking? your footing plan seems sufficient, possibly excessive.
r's brynk
-
30th October 2007, 09:13 PM #3New Member
- Join Date
- Oct 2007
- Location
- Brisbane
- Posts
- 2
Deck material and size
Hey, thanks for the reply. I will probably be using the following materials:
Stumps 90 x 90 treated pine
Bearers 90 x 70 treated pine
Joists 90 x 45 treated pine.
The deck will roughly be 8m x 6m.
-
30th October 2007, 11:27 PM #4
R Kenny
Are you putting a roof over the deck. If so it may not be adequate. I would really suggest you get an engineers recommendation.
When we built sheds if a footing was 450mm Dia x 1500mm deep on normal soil on class H soil they jumped to 600mm dia x 2000mm deep.
Similar Threads
-
Timber Species Properties Relevant to Decks.
By strangerep in forum DECKINGReplies: 3Last Post: 10th June 2007, 01:54 PM -
New Decking (splits)
By dreadz in forum DECKINGReplies: 3Last Post: 19th May 2007, 09:18 PM -
when good decks go bad
By johnmurrell in forum DECKINGReplies: 12Last Post: 16th April 2007, 11:21 AM -
Some advice about DECKS needed
By Lenny in forum DECKINGReplies: 12Last Post: 14th December 2005, 04:36 PM -
One for the builders (Re Decks)
By Sir Stinkalot in forum DECKINGReplies: 32Last Post: 31st January 2005, 08:19 PM
Bookmarks