Results 1 to 4 of 4
  1. #1
    Join Date
    Mar 2006
    Location
    Sydney, NSW
    Posts
    0

    Default Timber Species Properties Relevant to Decks.

    As you've probably already read, Yonnee got a bit upset in another
    thread regarding timber durability issues relating to decking.
    I know the feeling. There's really no substitute for properly
    researching timber properties thoroughly before embarking on
    exterior timber work. So I thought I'd post some further info for
    all the DIY deck builders/owners out there...

    Here's a useful (essential?) resource for self-education...

    http://www.timber.org.au/resources/Revised%20P1.pdf

    The above document has a reasonably comprehensive table that
    lists the properties of various species. The rest of the document also
    describes what the properties really mean (i.e: the fine-print).

    However, as I said in the other thread, there's some devil in the detail
    because the above-ground durability classes assume a "well-drained"
    situation, but decking (and joist tops) can remain damp for
    surprisingly long periods - so it's best to rely on the in-ground
    durability class.

    For in-ground durability class-1 timbers, reeding on the underside is a
    nice extra but not absolutely essential. If you can't get reeding, give the
    underside a coat of preservative before laying. To protect joist tops more,
    fold alcor flashing along the tops (or that specially moulded
    protector plastic that comes in a roll). Also apply preservative to
    places where timber meets timber, especially where timber rests on timber,
    since that's where moisture could be retained unseen for a long time.

    For people in bushfire-prone areas, there's some extra things to know:

    Currently, the only timbers rated as sufficiently fire-retarding to
    meet AS3959 are Blackbutt, Kwila(Merbau), Red Ironbark,
    River Red Gum, Silvertop Ash, Spotted Gum, Turpentine.

    But of these, only Red Ironbark and Turpentine are in-ground class-1.
    Blackbutt, River Red Gum, Spotted Gum are class-2, and Kwila(Merbau)
    is class-3. These are all termite-resistant. Silvertop Ash is also rated
    class-3, but is not resistant to termites.

    [Actually, the table says Kwila(Merbau) is in-ground class-2 and
    above-ground class-3, which sounds like it's the wrong way around.
    You'd expect it to be less durable in-ground. Maybe that's a typo. But in
    any case, one should be guided by the worst figure quoted - to be on
    the safe side.]

    Turpentine, although extremely durable, is a temperamental timber to
    work with outside in applications where ongoing good appearance matters.
    This is due to its high tangential shrinkage and occurence of a discoloured
    dark brown heartwood as well as the other beautiful pinkish heartwood
    (I speak from personal experience on this). So if you're trying to choose
    between turpentine and red ironbark, go for the latter.

    Happy reading.

  2. #2
    Join Date
    May 2007
    Location
    Sydney
    Posts
    11

    Default Thankyou

    Exactly what i've been looking for!

  3. #3
    Join Date
    Jul 2003
    Posts
    85

    Default

    Thank you, Strangerep, for taking both the time and effort in posting the information on suitable aspects of timber decking. Although, I am not a builder of decks, your information will prove invalulable to the many people who are seeking the many aspects to make an informed decision.


    JimJ www.restore-a-deck.com.au

  4. #4
    Join Date
    Mar 2006
    Location
    Sydney, NSW
    Posts
    0

    Default

    Quote Originally Posted by jimj View Post
    Thank you, Strangerep, for taking both the time and effort in posting the information on suitable aspects of timber decking. Although, I am not a builder of decks, your information will prove invalulable to the many people who are seeking the many aspects to make an informed decision.
    One other item regarding timber properties occurred to me later...
    When considering whether to use an oil-based or water-based finish,
    one should be aware that some resinous timbers (e.g: tallowwood) have
    a reputation for not accepting water-based finishes well (which is part of the
    reason why they have good durability). That's just what I've been told,
    but I have no personal experience with this aspect. I used oil on my
    turpentine decking (which also has a reputation for being resinous
    and containing water-repellent silica). Neither do I know of any online
    resources that discuss this aspect in more detail.

    As you're a deck restorer, could you perhaps you comment further?

    - strangerep.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •