Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2006
    Location
    Outer East - Melbourne
    Posts
    265

    Default Fitting architraves to uneven window frames

    The timber frame for the double hung windows is about 12mm proud of the wall framework inside.

    I have lined the internal wall with 4.5mm cement sheet, and of course this now means the frame of the window is still about 8mm proud.

    I cannot plane the frames back, as the internal bead that holds the hung windows in sits almost level with it, maybe pretty difficult to do.

    I want to fit any architrave, it does not have to be bullnose. Could I rebate the architrave 8mm on one half of the back side to make it fit flusherer to the cement sheet on the outside? Do you think it would look silly? I may have to use just straight rectangular MDF preprimed 68 x 19mm or so?

  2. #2
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    you can rebate the arc or

    make some 8mm packing strip that fits against the cement sheet and the arc will sit on the strip.
    or

    if there are minimal gaps you could use 12mm quad at the edge of the window
    Regards, Bob Thomas

    www.wombatsawmill.com

  3. #3
    Join Date
    Jan 2007
    Location
    Goulburn NSW
    Age
    89
    Posts
    7

    Default

    What I used to do is use a piece of 50mm X 25mm rip it in half so that it is square. Hold it against the frame and mark it with a pencil. Rip / plane to the line then glue it to the architrave. By doing this way it doesn't matter if the wall and frame are not parallel to each other.
    les

Similar Threads

  1. Window Architraves external
    By DavidC in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 2
    Last Post: 11th September 2006, 05:43 PM
  2. Polyester window frames??
    By Mcblurter in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 0
    Last Post: 17th August 2006, 04:34 PM
  3. Making window frames
    By Wildman in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 7
    Last Post: 9th May 2005, 12:32 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •