![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 6 of 6
Thread: Carba-tec CTJ-196 Jointer Review
-
29th May 2009, 06:54 PM #1
Novice
- Join Date
- May 2009
- Location
- Sydney
- Posts
- 4
Carba-tec CTJ-196 Jointer Review
I recently purchased a Carba-tec CTJ-196 jointer. I thought I'd give it a quick review...
This is the short table 6" Deluxe unit. I wandered around checking out jointer after jointer. Too expensive, awkward fences. I eventually settled on this unit. And I'm really pleased.
The tables were flat to within a thou. and in the 0 position they were coplanar to within a couple of thou. For what I do, that's more than good enough (and it's very good - period).
I particularly like the fence mechanism on this jointer. It's simple to use, and easy to slide & lock (I usually move the fence progressive back when I have a lot of edges to joint in a probably worthless effort to even the knife wear). Setting the stops was fiddly (the usual screw & nut-as-a-lock mechanism you get on low cost machinery).
Chip extraction absolutely needs a dust collector to work properly, or the chips will just block up in the chute. With a modest collector, though (mine's a 2hp) it works fine.
The infeed table height adjuster is simpler to use, but quite 'hard' to depress the unlocking lever. I need to find a little bit of time to look at it and adjust that out if possible.
The rolling cabinet works well.
All in all the issues above are minor at most. I really like this jointer. I've been using it heavily over the past two weeks, and it's done a sterling job. Of course, if you have the room a longer table is always better, but for those like myself whose workshops are "space challenged", it's a brilliant compromise. I haven't noticed any disadvantage to the short table at all for normal furniture work .. it's probably going to be more noticeable if you're working with 3m lengths of timber!
Phil
-
30th May 2009, 11:25 AM #2
Shouldn't that be "Carba-tec CTJ-196" ?
Thanks for the review Phil. Just one question, what made you choose the CTJ-196 in preference to the CTJ-190 which has almost identical specs except for the extra 10mm length of the bed and of course, the cabinet enclosed motor of the CTJ-196? The CTJ-190 is $160 cheaper and I guess you decided the CTJ-196 was worth the extra dollars but what was your main reason for choosing it. On the surface, it would appear you can buy "almost" the same jointer for $160 less so that may be of interest to others who might be considering buying one of the CT jointers. I would imagine your review comments would almost certainly be appropriate to the CTJ-190 as well as the CTJ-196
Thanks again Phil, good review. I am sure there are many of us who are wanting a good cheapish jointer.Reality is no background music.
Cheers John
-
30th May 2009, 12:36 PM #3
Novice
- Join Date
- May 2009
- Location
- Sydney
- Posts
- 4
Yep - thanks! I got in right in the subject and wrong in the body! Fixed it now...
I didn't like the infeed table mechanism much on that jointer when I played with it in the showroom .. it seemed stiff and difficult to get an exact setting. But mostly it was the fence mechanism. A lot of the low end jointers seem to have fence mechanisms that require a contortionist to balance two moving heavy pieces of cast iron while using their third hand to lock the thing in place!I found that with the budget Carba-tec model and all those from Hare & Forbes. It's probably a personal quirk, but clunky mechanisms really bug me.
I also really liked the roller cabinet. A good roller base adds anything from $60 on up to a machine, so for a tight shop that reduces the money savings. Everything in my shop is on wheels .. I need to shift everything to the walls to have just enough space to drop a sheet of ply on the floor to break it up (using my pro-grip guides.. I really should post a review on those. I love those things!
-
30th May 2009, 02:06 PM #4
I got one of those as well. This was the first Jointer that I have purchased let alone used. I have had it for about a year now. Working really nice.
-
30th May 2009, 07:39 PM #5
-
17th June 2009, 02:11 PM #6
Sounds pretty much the same as the CTJ-190 I purchased late last year. Not perfect, but has so far done all I have asked of it. Only bummer was the round plastic knob on the infeed height preset that stripped its thread, so I'll probably throw a nyloc on it for grip.
Couple of extra points:
I use scrap bits of 25mm chipboard and four locking castors at about $6 each from the local $2 shop to make mobile bases for my machines. Much quicker than dragging the welder out.
Also, the jointer puts a very nice edge (including bevels) on acrylic sheet in preparation for glue.
Apologies for the minor hijack...