Hi everyone
I am having trouble, we made some hardwood benchtops for our house and we decided to use a clear coat on them to protct them,
however the first coat goes on fine the 2nd coat blisters.
the first time it did this we sanded the whole bench back thinking it was becuase the bench was in the shed with the cold weather,
so we installed the bench and put the 1st coat on (again) then this morning more then 12 hours after the 1st coat i did the second coat and it blistered again.
I used cabots cfp on all our floors and it never did this why would it be doing this on the benches?
the bench is dry and clean I can't explain it at all as it happens within a mintue or two after application. please help save my sanity,
Nadine


Read the full thread at RenovateForum.com...