Hi All

the job is cladding a structure with pine chamfer board.

I have 2 nail guns to choose from so im wondering which one will do the best job. i have a paslode cordless framer and a hitachi coil nailer.

any advice on weather these guns will be good enough and if so any specific nails to buy?

i have some 75mm d strip nails for the framer and regular gal 32mm and 60mm wire collated coil nails for the coiler. these are the type that most people might use for fence pailings

i reckon the coiler but wouldn't i be looking for a nail with a smaller head?

thanks heaps

Quintin


Read and reply to the full thread at RenovateForum.com....