Results 1 to 7 of 7
  1. #1
    Join Date
    Mar 2009
    Location
    South Maclean
    Posts
    10

    Smile Using HVLP Wagner W 860 E system

    after a bit of research on what to spray stuff with, decided to go with HVLP Wagner system. Paid $329 in Bunnings. Unit is sturdy plastic construction, wouldn't withstand a nuclear blast, but won't fall apart in your hands like Karcher units.
    Main advantage before compressor/air gun is size and therefore portability. The whole lot can be packed away into a carry box, easily transported and utilized around the house to do little odd jobs. I am spraying quite a big lot of little veneer board units using Tung Oil, I am going to try to spray them assembled, so it's quite a fiddly job with a lot of corners and angles, so it will give the Wagner a good test especially detailing wise. Just did some testing spraying water. All the controls are on the gun, makes it easy to control air flow and amount of material put out. let's see what happens. i'll keep this thread updated as I go. I hope will give people a bit more of an idea on wagners

  2. #2
    Join Date
    Nov 2005
    Location
    Darkest NSW
    Posts
    93

    Default

    I'd be interested to see how you go. I researched these units a while ago, and the Wagners looked like some of the better HVLP units out there. I was surprised to find them in Bunnings to be honest - thought they would have gone for the cheapest brand.

    Let's see how much of the finish ends up on the piece, and how much on you.....

  3. #3
    Join Date
    Mar 2008
    Location
    Lambton, Newcastle, NSW, Australia
    Posts
    1

    Default

    I have the 560 I think it is and it works realy well with estapol, oils and I have a seperate head for paint finsihing. Good control, overspray is fair similar to most spray guns, far cheaper and more compact.
    Instagram: mark_aylward
    www.solidwoodfurniture.com.au


    A good edge takes a little sweat!!

  4. #4
    Join Date
    Mar 2009
    Location
    South Maclean
    Posts
    10

    Default

    I was surprised to see the wagners in Bunnings as well. I nearly bought the same unit online for $ 378. If i won't be as successful at coating all the corners as i wish to be, I am also considering obtaining a detailing attachment (basically just a long pipe bit) with extra container. $50,sold in Bunnies as well. Looks like a handy thing, because you can get in real tight corners with it. Hope I can do with out it though.

  5. #5
    Join Date
    Oct 2009
    Location
    perth
    Posts
    2

    Default

    Yashinsky

    How did you go with you unit? I'm looking at getting the same one for odd jobs around the house. I'll be happy if the finish is similar (or better) to aerosol spray cans. What's the verdict?

  6. #6
    Join Date
    Mar 2009
    Location
    South Maclean
    Posts
    10

    Default

    Very happy with the purchase of the wagner. Can achieve finish as good as anything else. I only sprayed Tung oil so cannot advise on any other finishing products. Tung oil is very liquid so I was spraying with the lowest air flow speed. So there is still plenty of power to spray much more viscous stuff.
    Best advantage in comparison with spray cans is the speed with which you complete the job. Very simple construction, easy to get a hang off. Very few parts therefore not much can go wrong. Left it couple of times dirty after finishing a job, was anticipating a
    hell of a job to clean it up later, ended up absolute breese. Few minutes later and 100 gramms of turps, she was ready to go. NB: I do not promote leaving your tools dirty after working. He-he-he
    You can also purchase second pot for around 30 bux if you want to spray paint and would like to keep the other one only for woodworking finishes.

    To finish up, money well spend. portable, easy, superb finish. I think priced ok as well.

    Cheers,

    Alex

  7. #7
    Join Date
    Oct 2009
    Location
    perth
    Posts
    2

    Default

    Thanks Alex! I'm more optimistic seeing you're happy with your wagner. I wonder if there is a portable HVLP system that will spray acrylic enamels in high gloss finish and do a decent job of it. They must exist ... hypothetically.

    Initially, I bought a cheap ozito 40 dolla sprayer, tested it with water and promptly returned it the next day, could not hear what the guy had to say - went slightly deaf from the testing session ... heh

Similar Threads

  1. CIG HVLP spray kit still available
    By bsrlee in forum FINISHING
    Replies: 19
    Last Post: 13th March 2024, 10:29 AM
  2. HVLP spray gun
    By jaspr in forum FINISHING
    Replies: 17
    Last Post: 15th October 2007, 02:12 PM
  3. HVLP Vs Airless
    By Bakerman in forum PAINTING, PLASTERING, TILING, DECORATING, etc.
    Replies: 3
    Last Post: 14th September 2007, 04:58 PM
  4. Wagner rollers
    By Stu in forum PAINTING
    Replies: 3
    Last Post: 4th January 2007, 09:27 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •