![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: Barge Boards - What to use
-
16th February 2009, 09:40 PM #1
Barge Boards - What to use
I have to replace a couple of barge boards on the gable of my house.
Its an old place and the existing ones are about 250mm x 38mm and 3000 long.
I know these days Treated pine is about all that is around in this size but every time I have used it it twists around like !!!.
Can somebody suggest what I should use .I have seen the finger jointed /primed stuff but not sure if its the way to go.
Thanks
Greg
Read the full thread at RenovateForum.com...