![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 15 of 21
-
16th November 2008, 09:35 PM #1
need to fill a gum vein, where do I get powder colours?
Finishing seems to be the right place for this ...
I've built a table from KD tassie oak and am ready to finish it
the top has a very prominant gum vein about 1.5mm wide, 200mm long and aout 3mm deep
the dried gum is a sort of dark red-purple and is very brittle
I'd like to fill the hole with epoxy coloured to match but where, in Sydney, can I get the powdered pigments?
Stimpsons in Balmain used to carry them, but have since closed their doors.
ian
-
17th November 2008, 12:34 PM #2
True pigments are available from antique restorers and polish suppliers online but you can get by with the range of oxides etc available from your local hardware store (Bunnings have a good range). You can also get universal tints from your paint supply store which work very well.
Andrew
-
17th November 2008, 12:43 PM #3
-
17th November 2008, 12:51 PM #4
G'day Ian,
These blokes sell them http://www.solidsolutions.com.au/vie...cts.php?cat=14
I'm waiting on a delivery of black dye from them, can't comment on the product, but elsewhere in the Forum someone recommended them.
-
17th November 2008, 02:19 PM #5
I'm just being a bit of a purist here. In the old days pigments were derived primarily from natural sources such as dirt (inorganic pigments) and plants (organic pigments) for painting and colouring, etc. Technology then led to the development of synthetic pigments (from the 1860's). For example, ultramarine was once made out of crushed lapis lazuli but is now almost universally produced as a synthetic pigment.
For antique restorers it is sometimes important to have access to the traditional natural pigment as opposed to modern synthetics or synthetic/natural blends but for most furniture colouring applications the distinction is largely unimportant.
Andrew
-
17th November 2008, 04:25 PM #6
Well I'm only a simple paint chemist, and I don't know what being a "purist" has to do with it, but if a substance is being used as a pigment it is a pigment.
So, forgive me for being pedantic, therefore any substance being used a a pigment is a "true" pigment.
Having said all that, and getitng back to the original question, any of the oxides will do the job, or any of the universal colourants can be used. They are basically pre-dispersed pigments, some of them being oxides or carbon black.
Last time I needed to do the job you are talking about I went to my local big green shed and asked them to squirt some universal colourant in a little jar, I used an umber colour, and they were happy to so and didn't charge me anything.
-
17th November 2008, 06:01 PM #7
Bigshed,
My use of the word "true" was in an historical context, as I thought I made clear in my last post. I also said any distinction between "true" and synthetic pigments was largely irrelevant for most purposes.
Perhaps "traditional" as opposed to "true" would have caused less concern. It would, I agree, be the more accurate choice of words. You are undoubtedly correct that if something functions as a pigment then it is a pigment and I didn't mean to cause any confusion on that point. Still, if you are trying to match something that was tinted with a "traditional" pigment and you want to use the exact same thing (either because the job is extremely valuable or because you are just an obsessive purist) it is good to understand that you might have to go to a specialist supplier for the traditional pigment.
Consider me corrected though for the choice of words.
Would you mind helping me out with another query I have been trying to nail down on this site? Have you ever come across an old Wattyl product called "Crystal Veneer"? The line has been deleted but I have been told by many old polishers that the stuff was fantastic and they haven't come across anything quite as good since. Would you have any idea of what was in it? I would be very grateful for any help you could offer me on this point.
Regards
Andrew
Andrew
-
17th November 2008, 08:30 PM #8
You can also try http://www.modelit.com.au/, they also sell metal fillers too like brass, copper, silver & gold.
Neil____________________________________________Every day presents an opportunity to learn something new
-
17th November 2008, 10:11 PM #9
Thanks Neil,
I was going to PM you and ask where you got yours from.
-
17th November 2008, 10:58 PM #10
I have used ordinary (and cheap) powder paint from an art supply shop.
Pugwash.
Never criticise Australia Post. One day they might find out where you live.
www.clivequinn.com
-
18th November 2008, 12:06 AM #11
thanks everyone
last time I needed to do this I had access to a range of powdered earth (ochre?) colours – colours like burnt umber, ventian red, burnt sienna, raw sienna, purple, black
Is there any incompatibility when using liquid paint colours in epoxy or grain filler?
just on grain filler, is there any reason not to use spirit stains.
I've tried two different art supply stores in Chatswood, but neither carry powdered artists colours
so I'm interested in sources in Northern Sydney
ian
-
18th November 2008, 12:19 PM #12
I'm not sure why you even want a pigment. I make a lot of stuff out of KD Tassie Oak and this is another suggestion for gum vein. Scrape out all the dried gum resin so you have a reasonably clean grove. Darken up the bottom of the groove if you want - anything works okay for this even dark brown or black texta - but not usually necessary. Then slightly overfill the groove with Glass Coat (http://www.glasscoat.com.au/) available from Bunnings. After it hardens, sand it down flush, sand down through the grits as you would normall for the timber and the glass coat goes pretty clear. Finish with Danish oil (I use Organoil) and wax, or whatever other finishing method you prefer... two pac, Wattyl Speed Clear,.… ny of that works. The final appearance is really great -- perfectly smooth finish with the nice gum feature. If you colour the epoxy it just looks like coloured bog in my opinion -- the variation in colour and texture of the gum vein (which you can only see with a clear filler) is what makes it look nice.
Cheers.
-
19th November 2008, 06:09 PM #13
Tim
- Join Date
- Nov 2008
- Location
- Swifts Creek
- Posts
- 26
I sand timber floors all the time that are covered in gum veins. The simplest, cheapest and after much experimentation I've found Ebony/black coloured Timbermate wood filler looks the best and most natural solution. Scrape out loose gum and fill then sand off excess. Gum veins look black when finished/coated anyway.
-
26th November 2008, 11:40 PM #14
Thanks everyone who responded
ended up making up a batch of customed coloured filler
will post a photo after the weekend
ian
-
28th November 2008, 11:25 AM #15
Ian consider coffee grounds they match up very well with.
Inspiration exists, but it has to find you working. — Pablo Picasso
Similar Threads
-
What's the rule on how many colours?
By Pollyanna in forum PAINTING, PLASTERING, TILING, DECORATING, etc.Replies: 11Last Post: 9th October 2007, 01:34 PM -
Learning Colours
By Rodgera in forum JOKESReplies: 1Last Post: 14th September 2007, 09:03 AM