



Results 1 to 1 of 1
-
16th November 2008, 06:50 AM #1
Plasterboard over lathe and plaster ceiling.
I have a lath and plaster ceiling that is badly crazed and has previous water damage. I want to put new plasterboard over it and new fibrous cement cornices.
What is the best method to do this. Is it best to fix battens to the underside of the old lath and plaster ceiling and then fix the plasterboard to them. Or do you just screw the plasterboard direct to the existing ceiling joists with longer screws? I was thinking with the flaking finish on the old ceiling that I would not be able to get adhesion with plasterboard adhesive if I did not use battens.
Fred
:doh:
More...
Similar Threads
-
plasterboard ceiling
By benzine in forum PLASTERINGReplies: 7Last Post: 28th December 2007, 12:00 AM -
Plasterboard a ceiling
By chessp in forum PLASTERINGReplies: 6Last Post: 27th December 2007, 11:36 PM -
inverted peak in ceiling plasterboard
By tiffy in forum PLASTERINGReplies: 8Last Post: 1st November 2007, 10:29 AM -
Plaster & Lathe Walls - Plasterboard over or remove?
By Beep Beep in forum PLASTERINGReplies: 35Last Post: 4th July 2006, 12:03 PM -
cracks in plasterboard ceiling
By jasdillon in forum PLASTERINGReplies: 0Last Post: 19th July 2005, 09:21 PM
Bookmarks