![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 15 of 16
Thread: Happy Birthday Studley
-
20th June 2008, 10:52 AM #1
Happy Birthday Studley
Happy Birthday mate, have a good one!
Coffee, chocolate, women. Some things are better rich.
-
20th June 2008, 12:20 PM #2
HB and thanks again for all the wood
Cheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
-
20th June 2008, 12:30 PM #3
Happy Brithday Studley,
Hope you have a good weekendIf I do not clearly express what I mean, it is either for the reason that having no conversational powers, I cannot express what I mean, or that having no meaning, I do not mean what I fail to express. Which, to the best of my belief, is not the case.
Mr. Grewgious, The Mystery of Edwin Drood - Charles Dickens
-
20th June 2008, 03:38 PM #4
Hope you manage a Happy one Steve, have one or two for me!
The secret to creativity is knowing how to hide your sources.
Albert Einstein
-
20th June 2008, 03:51 PM #5
Hb StudMaster
There was a young boy called Wyatt
Who was awfully quiet
And then one day
He faded away
Because he overused White
Floorsanding in Canberra and Albury.....
-
20th June 2008, 05:31 PM #6
-
20th June 2008, 07:19 PM #7
Happy Birthday Studmeister.
Get stuck into some hardwood cake...Hooroo.
Regards, Trevor
Grafton
-
20th June 2008, 09:44 PM #8
haha thanks guys! Made my day you really did. Went out for dinner with the kids and the ex was there too! Kid's were great she couldn't help reminding me about all the things I don't like about her and I enjoyed the meal. I am looking forward to much better times though.
It might be going to bounce my way in a funny sort of way.
Glad that Glock is talking to me because I have told a million newbies here that I don't know what wood they have for sure but Glock! Just ask Glock and he will tell you. People seem to think because I can run a phone and a spreadsheet as well as making some bank transfers that get wood on their doorstep that I have some huge knowledge of hardwood! UMM it is wood that is hard some of the time although Balsa is a hardwood and it isn't that hard. Maybe you should tell people to belt it against their heads and count the number of hits before they go down. Then do it again with the other wood and do a count also. As a way to differentiate species you will have proved nothing much but you will know which one drew the most blood.
Anyway thanks for remembering me guys was really good of you
StudleyAussie Hardwood Number One
-
20th June 2008, 09:57 PM #9There was a young boy called Wyatt
Who was awfully quiet
And then one day
He faded away
Because he overused White
Floorsanding in Canberra and Albury.....
-
20th June 2008, 10:05 PM #10Aussie Hardwood Number One
-
20th June 2008, 10:34 PM #11
Happy birthday to you
Studley
You deserve it.
-
20th June 2008, 10:58 PM #12
Happy birthday Steve
It's better to be thought of as a fool than to speak up and remove all doubt!
-
21st June 2008, 09:11 PM #13
G'day Studmeister.
You only learn through experience over the years. When I started at the mill 30 years ago, There was an old bloke that everyone asked to ID species.
Now, they ask me to ID. Buggered if I know how I know, It just comes to me.
Remember....You must be one with the hardwood, grasshopper Studmeister. Embrace the hardwood.... I said enbrace....not mate with it....
Hooroo.
Regards, Trevor
Grafton
-
21st June 2008, 09:34 PM #14
*LOL* I Haven't been able to mate with anything for ages Glock!
But I know what you mean there is a bit of instinct to it isn't there.
StudleyAussie Hardwood Number One
-
21st June 2008, 10:03 PM #15
Similar Threads
-
happy birthday x 3
By Rusty in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 0Last Post: 19th February 2005, 09:37 PM
Bookmarks