![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: need help to block timber fence
-
11th April 2008, 01:25 PM #1
New Member
- Join Date
- Apr 2008
- Location
- Pascoe vale victoria
- Posts
- 2
need help to block timber fence
I have a range style hardwood front yard fence, gaps between the railings are approx. 15-25mm. Is that a solution there to block the gaps while wind still can go through a bit ?
Fixing another layer of railings (hit and miss) to the back of posts is an expensive solution. And the the fence will become too thick for our small front yard.
I am not sure here is the right place to ask the question.
-
11th April 2008, 01:40 PM #2
-
22nd April 2008, 03:46 AM #3
New Member
- Join Date
- Apr 2008
- Location
- Pascoe vale victoria
- Posts
- 2
Thanks
-
22nd April 2008, 11:24 AM #4
You could also fix some rabbit proof netting to the back. Much more durable. Bury it six inches into the ground to keep it in place at the bottom and staple it along the top.
Comes in 1200mm wide in a roll.
Available at rural supplies.
Similar Threads
-
Advice on cement for limestone block fence
By jc888 in forum LANDSCAPING, GARDENING, OUTDOORSReplies: 7Last Post: 30th October 2006, 12:32 AM