Results 1 to 13 of 13

Thread: Blower / Vac

  1. #1
    Join Date
    Apr 2007
    Location
    Perth
    Age
    50
    Posts
    0

    Default Blower / Vac

    Hi

    I am after advice on a blower /vac combination.
    My wife bought me a TALON petrol one last week however the method to convert from blower to vac is extremely cumbersome.

    Anyone that has one, I would like to hear your opinion. Also electric versus petrol etc, what do you think?

    Anyone tried one of the Victa upright models?

    Many thanks

  2. #2
    Join Date
    Nov 2007
    Location
    Melbourne
    Posts
    2

    Default

    I bought a cheapie- Electric GMC $49 jobbie from Bunnings. For what I use it (Picking up grass clippings from pebble garden beds after edging), works fine. Has a simple lever to switch from blower to vac.

  3. #3
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174

    Default

    I hate em all - the noise drives me nuts. I have a 12V battery powered lawn mower that I use to mow the paving with on a low height setting. It picks up 99% of all the grass and leaves with about 10th of the noise. Not much good at picking up grass from pebble gardens but!

  4. #4
    Join Date
    Apr 2007
    Location
    Perth
    Age
    50
    Posts
    0

    Default

    Yes, I definitely want one, where you just flick a switch and it converts from blower to vac.

    Any suggestions?

  5. #5
    Join Date
    Jun 2004
    Location
    Grafton, N.S.W.
    Age
    64
    Posts
    546

    Default

    I have the GMC $49 blower/vac and a Homelite petrol B/V.
    The petrol one is only used as a blower due to the pizzing around to convert it to Vac.

    The GMC has not been used since getting the petrol blower.
    Hooroo.
    Regards, Trevor
    Grafton

  6. #6
    Join Date
    Apr 2007
    Location
    Perth
    Age
    50
    Posts
    0

    Default

    Thanks guys

    I have just read reviews in the Bunnings Handyman Magazine and also on choice.com,.au

    Basically they all have good and bad points, mainly bad points

    hmmmmm

    I just want a lightweight petrol blower/vac that converts with the flick of a switch

    You think there would be a good one on the market but from my research it seems not

  7. #7
    Join Date
    Oct 2007
    Location
    Alexandra Vic
    Age
    69
    Posts
    0

    Default

    I have a 7 year old 2 stroke Ryobi with lever flick action change from vac to blow. It's a reasonable compromise, blow is about 85% of an equivalent dedicated blower, vac is adequate for most things, bark, grass trimmings, dry leaves etc.

    Issues to date, one visit to repairer with blocked carby due to muck in fuel, vac bag zip started to peel open at the fixed end a month ago. Reset the zip traveller, peeled the faulty teeth off, and stiched the section closed, then washed the bag to get rid of the fine dirt clogging the fibres. Working like a dream again now, but the zip openning is about 2in shorter.

    Could get the same unit last year with an included 'head unit' that spreads the suction zone to cover about 16 inches and has a couple of wheels. Haven't worked with that cos I bought mine about 18 months before they started including it.

    Unit works at home and at family property (0.5 and 1 acre) plus has done a load of cleaning parking areas and kerbing when mulching commercial landscaping jobs lately, so it gets a fair workout.

  8. #8
    Join Date
    Apr 2007
    Location
    Perth
    Age
    50
    Posts
    0

    Default

    Quote Originally Posted by malb View Post
    I have a 7 year old 2 stroke Ryobi with lever flick action change from vac to blow. It's a reasonable compromise, blow is about 85% of an equivalent dedicated blower, vac is adequate for most things, bark, grass trimmings, dry leaves etc.

    Issues to date, one visit to repairer with blocked carby due to muck in fuel, vac bag zip started to peel open at the fixed end a month ago. Reset the zip traveller, peeled the faulty teeth off, and stiched the section closed, then washed the bag to get rid of the fine dirt clogging the fibres. Working like a dream again now, but the zip openning is about 2in shorter.

    Could get the same unit last year with an included 'head unit' that spreads the suction zone to cover about 16 inches and has a couple of wheels. Haven't worked with that cos I bought mine about 18 months before they started including it.

    Unit works at home and at family property (0.5 and 1 acre) plus has done a load of cleaning parking areas and kerbing when mulching commercial landscaping jobs lately, so it gets a fair workout.

    I contacted a local mower shop today and he said that he has a 12 year old Ryobi and it works flawlessly.

    The thing he told me is that they USED to be good and USED to be made in Japan. Now they are made in China and are apparently complete rubbish or so he said....
    Everyone that I have ever known who owns Ryobi equipment would never buy it again.

    Sounds like yours maybe Japanese made.

  9. #9
    Join Date
    Oct 2007
    Location
    Alexandra Vic
    Age
    69
    Posts
    0

    Default

    Quote Originally Posted by Arry View Post
    Sounds like yours maybe Japanese made.
    I'm not sure where it came from originally, as I said I have had it 7 years, probably getting closer to 8 now. Bought it soon after it was released in OZ cos I had the two properties (both long and narrow). Previously I had a weedeater electric that took ages to swap over from blow to vac and vv, and my uncle had an elec version of the Ryobi for the larger place, but no external power points. Hence I bought the petrol Ryobi, more noise but no need for power cables.

    Unfortunately, many items that used to come from reliable manufacturers are now being jobbed out to get the absolute lowest price, and quality suffers severely in some cases. I figured that it worthwhile discussing my experience with the Ryobi because it had lasted so long without grief. If you are getting reliable advice to steer clear of the current ones, I would take it. Sorry I can't help further because I haven't been looking, but I don't recall seeing anything other than a Talon clone in anything like a similar configuration.

  10. #10
    Join Date
    Apr 2007
    Location
    Craigieburn (VIC)
    Posts
    103

    Default

    i bought a Ryobi 30cc petrol one, and i think it does its jobs very well.

    though my expectations were bit high, as i never used a blower/vac before in my whole life.

    btw if someone is interested in buying one, there is a shop in Campbellfield which sells these units for $88 with one year warranty. they called them ex-demo units.

    i personaly think its vac feature is very hard to use (due to interchange procedure). i found similar sort made by Talon in BigW for $199.

  11. #11
    Join Date
    Dec 2004
    Location
    Northen Rivers NSW
    Age
    58
    Posts
    758

    Default

    I use a broom.....nice and quiet


  12. #12
    Join Date
    Jan 2008
    Location
    Australia
    Posts
    18

    Default

    The honda 4 stroke blower gets good reviews...

  13. #13
    Join Date
    Jul 2006
    Location
    Queensland
    Posts
    3

    Default

    I have had one of the GMC blower/vacs for about 6 months.

    Works fine for my needs.

Similar Threads

  1. Stihl Blower?
    By Jacksin in forum LANDSCAPING, GARDENING, OUTDOORS
    Replies: 13
    Last Post: 3rd April 2006, 10:17 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •