![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 8 of 8
Thread: Slab and Footing steps
-
26th January 2008, 05:22 PM #1
Intermediate Member
- Join Date
- Dec 2007
- Location
- Perth
- Posts
- 16
Slab and Footing steps
Hi could someone confirm my suspicions regarding the following.
A "footing step" would be used when there is a change in height such as on a sloping site to maintain even brickwork.
A "slab step" would be used say in in a sunken lounge.
I have just got my slab detail form the engineers and they have included the above but I cant see where they will be used in my situation as my block is level and I have no sunken areas.
-
26th January 2008, 05:25 PM #2
Col,
Which has been included?
Or BOTH??Navvi
-
26th January 2008, 05:46 PM #3
Even on a level site, dropping the slab level for front/back porches isn't a bad idea.
I've also seen them being used under wet areas.
I've no idea why they'd use a footing step on a level site though...
- Andy Mc
-
26th January 2008, 05:46 PM #4
Intermediate Member
- Join Date
- Dec 2007
- Location
- Perth
- Posts
- 16
Ivan,
I have been given a A4 sheet of paper that has the specifications for external wall footings, Internal thickening,slab thickening, slab step and footing step.
The site is a class "S" site (sand over clay) with a S4 detail.
I understand the external,internal and slab thickening but I can't see where I would be using the slab step or footing step as my block is level and the actual slab will be level (no steps).
I suspect they just give out the "details" to cover all scenarios,but I would like to be sure as I am calculating how much concrete I will need.Last edited by col5555; 26th January 2008 at 05:47 PM. Reason: Grammer
-
26th January 2008, 05:51 PM #5
Intermediate Member
- Join Date
- Dec 2007
- Location
- Perth
- Posts
- 16
Skew,
No the specs for wet areas is 50mm max set down and maintain slab thickness.
-
26th January 2008, 06:00 PM #6
I'm thinking SLAB STEP for the Shower.
Other Than ThatNavvi
-
26th January 2008, 06:09 PM #7
SENIOR MEMBER
- Join Date
- Aug 2005
- Location
- Victoria
- Posts
- 412
They usually cut and paste all sorts of typical details that may not necessarily be applicable to your job, but the details are there if you need them.
Tools
-
27th January 2008, 10:47 PM #8
A "footing step" would be used when there is a change in height such as on a sloping site to maintain even brickwork.
A "slab step" would be used say in in a sunken lounge.
True about general specs and may not be refering to your plans.
But just in case.... Check the depths of the internal footings to the edge beam ones, they may be different depths and the steel may step there.
As for "slab step", usually the front/back patios and the garage if joined to the main slab will be dropped 86-172mm (one or two brick courses). Check the plans for rl's (heights of slab levels.) for this.
This will also mean the ground underneath the slab will be stepped as well.
Just my two cents worth.
Similar Threads
-
Drilling holes into soft concrete footing
By gsart1 in forum FLOORING, DECKING, STUMPS, etc.Replies: 6Last Post: 28th August 2007, 02:19 PM -
Stone footing repair
By mark b in forum CONCRETINGReplies: 4Last Post: 5th May 2007, 02:13 PM -
Footing Design
By ptyltd in forum FLOORING, DECKING, STUMPS, etc.Replies: 4Last Post: 10th January 2006, 05:20 AM -
retaining wall footing
By Dan_574 in forum CONCRETINGReplies: 6Last Post: 24th September 2005, 11:21 PM -
Where to find verandah footing specs?
By anna in forum FLOORING, DECKING, STUMPS, etc.Replies: 2Last Post: 12th November 2004, 12:18 AM