Results 1 to 7 of 7

Thread: Leaning house

  1. #1
    Join Date
    Nov 2003
    Location
    qld
    Posts
    2

    Question Leaning house

    I have an old Queenslander, built 1888. House had a slight lean when bought. Still moving. Any advise as to prevent further moving

  2. #2
    Join Date
    Dec 2001
    Location
    Between a rock & a hard place (vic)
    Posts
    367

    Smile

    Plant a couple of oak trees alongside
    On a serious note get in a licensed builder to have a look to see where the problem is. Whatever the problem they should be able to give you an idea of what work would be involved in stabilising/realigning. For this you could squander money on “specially-trained architects” or you could get a decent local builder who does reno’s, knows how buildings are constructed and what to look for without needing an off the shelf checklists to guide them through.

  3. #3
    Join Date
    Apr 2003
    Location
    Tolmie - Victoria
    Age
    68
    Posts
    1,058

    Default

    Sounds like good advice if you have the inclination.


    - Wood Borer

  4. #4
    Join Date
    Aug 2003
    Location
    Pambula
    Age
    59
    Posts
    5,026

    Default

    Is it still open underneath or has it been closed in? It's either sinking on one side or the posts have developed a lean. Either way, you're probably going to need work on your footings. If it's still open, a bit of bracing wouldn't go astray. Definitely follow Eastie's advice and get in a builder. Get two actually and make them give you a quote.
    "I don't practice what I preach because I'm not the kind of person I'm preaching to."

  5. #5
    Join Date
    Nov 2003
    Location
    qld
    Posts
    2

    Thumbs up

    Originally posted by Eastie
    Plant a couple of oak trees alongside
    On a serious note get in a licensed builder to have a look to see where the problem is. Whatever the problem they should be able to give you an idea of what work would be involved in stabilising/realigning. For this you could squander money on “specially-trained architects” or you could get a decent local builder who does reno’s, knows how buildings are constructed and what to look for without needing an off the shelf checklists to guide them through.
    Thanks for the replies. I like tyhe Oak Tree idea. The house is on stumps and has been leveled, but the lean seams to from the base plate up, rather than from the stumps.
    Will take you suggestions on the builder.

    Many thanks Bruce

  6. #6
    Join Date
    Nov 2003
    Location
    Brisbane Australia
    Posts
    9

    Default

    Agree with all GET THE BUILDER IN NOW!

    Sounds very much like someone somewhere has removed some bracing walls and or a couple of bracing walls have failed.

    Are your door and window jambs plumb? Get a level and check. Also check for obvious cracking etc.
    Chappo
    "Always count ya fingers and a toes... never know what you might have missed!"

  7. #7
    Join Date
    Aug 2000
    Location
    Brisbane,Queensland,Australia
    Age
    78
    Posts
    45

    Default

    Have you checked for White ants?. if this not the case and the stumps have been replaced not just propped or wedged then as a previous reply some idiot has probably removed some timber from the walls for an alteration or addition.
    I have had a similar experience, when I was renovating our bathroom, The NOT SO BRIGHT person who decided to install a shaving cabinet found that the cabinet did not fit between the studs, you guessed it instead of changing the cabinet they cut TWO studs to fit it in the wall.

    I have of course replaced the missing timber.

    Just a thought you may wish to inspect for any alterations to the offending side of the house.

    Taffy
    PS we also have a queenslander

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •