Results 1 to 8 of 8
Thread: Robin's thread part 2 lol
-
23rd October 2007, 08:28 AM #1Novice
- Join Date
- Oct 2007
- Location
- Canada
- Posts
- 11
Robin's thread part 2 lol
Sorry guys for taking so long to respond. Was away for a few days.
I guess the pigmented stain idea intrigue's me a bit. I don't know too much about it, but what does everybody think of this idea ? Has anyone tried this before. I guess I'm going to have to search out some stores in my city that deal with refinishing furniture and wood. I don't know if I can find the products and Home Depot or not. I haven't seen anything to do with pigmented stain or dye as of yet.
-
23rd October 2007, 11:52 AM #2Senior Member
- Join Date
- Feb 2006
- Location
- USA
- Posts
- 399
Dyes and Pigmented Stains
Robin,
If you go to the web site in the second link, you will find a lot of information on pigmented stains and dyes, plus a lot of other finishing articles.
Mac S
-
23rd October 2007, 06:57 PM #3Happy Feet
- Join Date
- Sep 2007
- Location
- Armadale
- Posts
- 887
pigmented stain or dye
I think this is whatis refered to over here as water base stain (dye) or spirit based stain( clean up with meths) or oil based stain( cleaned up with turps) and any reasonable hardware store like bunnings carry it as it is used as standard.
as i said before if it is teak you are staining water bases and spirit bases dont penetrate well.
there are also gell stains that have better penitration but I find the colour range a bit unnatural looking.
have a look round your local hardware store and ask the staff,
in the smaller chainstores there is usually somone around with farely good knowledge after all its not rocket science.
also remember that the sample boards put out by the manufaturers are often done on pine like your doors and sprayed on so the colour will not be as dense when you put it on teak.
happy hunting
astrid
-
23rd October 2007, 07:28 PM #4Happy Feet
- Join Date
- Sep 2007
- Location
- Armadale
- Posts
- 887
just had a thought
if there is a bit of moulding on the piece you can carfully remove, dress (sand smooth) the back of it and take it down to the shop with you, if you explain your problem a small store will often open a can and test a bit for you.(on the back)
this will save you spending money on a product that still dos'nt work when you get home.
pick a small friendly store i wouldnt ask at bunnies
gook luck
astrid
-
23rd October 2007, 07:59 PM #5Senior Member
- Join Date
- Feb 2006
- Location
- USA
- Posts
- 399
Pigmented Stains
Robin,
These are commonly used stains in the furniture industry, there is no mystery about these stains, they are very easy to make up yourself, if you choose to do so.
If you have a Home Depot in your area they will have these stains they come in many colors, they probably will also sell a few different brands.
If you mention that you want "pigmented wood stains," they will show you where they are located.
Using dye stains can be tricky, as they are permanent and you may only get one shot if its the wrong color stain, you difinitely need to make up complete start to finish samples if you are going to work with dyes.
Mac S
-
24th October 2007, 12:18 AM #6
Please Note - Robin lives in Canada and it would much easier for her to get a product that is available in the US or Canada, than one that is available in Australia. Baring in mind that the Aussie stuff is mostly quite different to US & Canadian.
Are you a registered member? Why not? Click here to register. It's free and only takes around 40 seconds!
Register to get rid of the annoying ads, plus you are able to participate, see all the posts, photos, pdf's, and more.
-
24th October 2007, 12:43 AM #7Senior Member
- Join Date
- Feb 2006
- Location
- USA
- Posts
- 399
Pigmented Stains
Neil,
I saw that Robin was from Canada, and knowing about Home Depot, I know that pigmented stains are available there.
-
25th October 2007, 02:01 AM #8Novice
- Join Date
- Oct 2007
- Location
- Canada
- Posts
- 11
okay guys, thanks for the info. !
Similar Threads
-
I see the light
By Bob Willson in forum JOKESReplies: 16Last Post: 26th July 2004, 06:02 PM -
Re-polishing a cabinet. Part 5
By Shane Watson in forum FINISHINGReplies: 7Last Post: 3rd February 2002, 09:39 PM -
Re-polishing a cabinet. Part 3
By Shane Watson in forum FINISHINGReplies: 2Last Post: 30th January 2002, 05:01 PM -
Re-polishing a cabinet. Part 2
By Shane Watson in forum FINISHINGReplies: 4Last Post: 29th January 2002, 08:15 AM
Bookmarks