![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 6 of 6
-
5th October 2007, 11:36 AM #1
Senior Member
- Join Date
- Aug 2002
- Location
- Williamstown, Melbourne
- Posts
- 0
When does fluoro ballast need replacing?
This is one for the sparkys out there:
When the fluoros start to flicker, it is usually a sign that the fluoro bulb itself needs to be changed. When I change the buld it usually has the telltale grey "burning" marks on the inside of the bulb.
The question is, when (if ever) does the starter need to be changed?
Does an old starter shorten the life of a new bulb?
What symptoms does a light with an old starter exhibit? e.g. if a new bulb flickers 5-10 times on ignition, does this mean a new starter is required?
(I did a search and couldn't find any answers.)Last edited by John G; 5th October 2007 at 12:53 PM. Reason: Realise I meant starter, not ballast
-
5th October 2007, 12:13 PM #2
You problem is the starter not the ballast
Blackening at the end of the tube and flickering a lot on startup is classic symptoms.
If the ballast goes the light will simply not work in more time than not it may take out a fuse.
This may help http://home.howstuffworks.com/fluorescent-lamp.htm
Incidentally new flouos have electronic ballasts and require no starter
and illuminate almost instantly
-
5th October 2007, 12:56 PM #3
Senior Member
- Join Date
- Aug 2002
- Location
- Williamstown, Melbourne
- Posts
- 0
OK, thanks, on reading your link I definitely meant starter, not ballast (I thought they were the same thing). I have edited the first post.
I am asking because we've had our outdoor bug zapper for a few years now. The UV bulbs usually last a year, so we have replaced them several times. But I've never replaced the starter, and was wondering how I would know if I needed to?
-
5th October 2007, 05:51 PM #4
Senior Member
- Join Date
- Jun 2006
- Location
- the 'burn
- Posts
- 118
at work when we replace fluro tubes we replace the starter at the same time.
also, in a room if you replace all the tubes at once, when several start to flicker you know the rest are about to go too.
it could get costly for a homeowner, but... "it's how the pros do it"
-
5th October 2007, 06:39 PM #5
New tube, new starter
Chris
========================================
Life isn't always fair
....................but it's better than the alternative.
-
16th October 2007, 04:04 PM #6
For a bug zapper, there should be an inverter unit providing high voltage very low current for the ZAP, and the tube would normally be driven from the inverter as well. All the units that I have come accross have been, but they have been compact domestic units, not the commercial ones seen in food prep areas. Multi tube commercials could be starter/ballast or inverter driven.
For the compacts, you won't have a starter or ballast, so you don't need to replace them. If the inverter dies, nothing works and its probably cheaper to replace the whole unit rather than repair.
Similar Threads
-
Replacing porcelain fuse wedges
By cfv in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 5Last Post: 24th June 2007, 09:12 PM -
Replacing stove
By barbz in forum KITCHENSReplies: 1Last Post: 6th June 2007, 09:20 AM -
replacing brick piers with stumps
By rscho in forum FLOORING, DECKING, STUMPS, etc.Replies: 10Last Post: 18th March 2006, 10:10 PM -
Replacing a rotten stump
By anthonyl in forum FLOORING, DECKING, STUMPS, etc.Replies: 13Last Post: 3rd August 2005, 12:15 PM -
Replacing Bearers and Piers
By silentC in forum FLOORING, DECKING, STUMPS, etc.Replies: 14Last Post: 30th April 2004, 04:36 PM