![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 8 of 8
Thread: Oil finish to deck
-
10th September 2001, 11:29 PM #1
New Member
- Join Date
- Sep 2001
- Location
- South Africa
- Posts
- 4
Oil finish to deck
I'm wanting an "oiled" finish to an african rosewood floor/deck I'm doing as the oiled finish has a beautiful deep lustre (the floor extends outdoors at the same level, therefore same finish required inside as outside). I don't want varnish (re-sanding inside is not an option).
Help - what oil should I use (and application / number of coats, how often, etc) that will give me the longest possible maintenance free period - I know that it will be a high maintenance finish, but would still like to have to do it as seldom as possible.
Thanks
-
11th September 2001, 08:26 AM #2
Supermod
- Join Date
- Jul 1999
- Location
- Brisbane, Qld.
- Age
- 48
- Posts
- 579
High maintenance is the word.
I have an oiled deck on the back of my ute and I have to re-oil every 2-3months. Actually it needs doing again!! grrrr
I just used a decking oil from local paint store. Nothing too fancy and I have no idea what it is made up off. I applied about three coats initially and that looked fine for the first monthIt might pay to contact a local floor finisher and talk to them about what they recommend in terms of an oil finish. They will most likly have the best advice, afterall thats there income.
HTH
Cheers!
------------------
Shane Watson..
Combine Love & Skill & You Can Expect A Masterpiece!
-
11th September 2001, 09:22 AM #3
Organoil have a decking oil that is supposed to be pretty good.
KEEP A LID ON THE GARBAGE...Report spam, scams, and inappropriate posts, PMs and Blogs.
Use the Reporticon at the bottom of all Posts, PM's and Blog entries.
-
11th September 2001, 01:20 PM #4
Senior Member
- Join Date
- Jun 1999
- Location
- Adelaide, South Australia
- Posts
- 38
G'day M
African Rosewood for a deck, that would ave been lookshurry to oos!
No expert opinion from me. Just wanted to say that it sounds like the wood may be undercover, the sun (uv) is the killer on all clear finishes to my knowledge.
Cheers
Rod
-
11th September 2001, 09:48 PM #5
New Member
- Join Date
- Sep 2001
- Location
- South Africa
- Posts
- 4
In reply to Shaun
I'm in South Africa and none of the ZA guys use oil (they all do varnish) - and none seem to know anything worthwhile (most of our building is in brick / concrete so it should not come as too great a surprise).
I've only had two suggestions that seem worth pursuing (so far)
1. Use boiled linseed oil; and
2. Use a polymerised tung oil.
Any suggestions / comments?
All help much appreciated.
Regards
Mike b
-
13th September 2001, 07:12 PM #6
New Member
- Join Date
- Sep 2001
- Location
- South Africa
- Posts
- 4
In reply to ubeaut
I contacted Organoil - but they don't have ZA agents.
help please!
-
13th September 2001, 07:44 PM #7
Supermod
- Join Date
- Jul 1999
- Location
- Brisbane, Qld.
- Age
- 48
- Posts
- 579
MB, heres some links I have found that may lead somewhere for you.
http://www.ronseal.co.uk/product/ron...cking/oil.html
http://www.tryrelics.co.uk/www.tryre...ct-55164.thtml
http://www.wattyl.com.au/cf/wattyl/w..._Sheet_No=5.25
The first two appear to be UK web sites, so that should be closer to home for you & may lead to an easier source for you.
HTH
------------------
Shane Watson..
Combine Love & Skill & You Can Expect A Masterpiece!
-
17th September 2001, 07:31 PM #8
New Member
- Join Date
- Sep 2001
- Location
- South Africa
- Posts
- 4
Thanks
Will have a look.
regards
mb