![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 15 of 25
Thread: Small Toilet Advice
-
26th July 2007, 03:27 PM #1
Small Toilet Advice
Howdy, new here, love this site, bloody tonnes of tips to pick up from you lot.
Anyway, doing an ensuite reno, its rather narrow but long. 1100x3600.
I'm using the exisiting plumbing and replacing the toilet (amongst another million things). To get to the shower you need to walk past the toilet. My problem is most toilets are around 660mm wide (wall to lid), leaving me only 440mm of walking space. While is isnt the tightest gap, I would like to get as much space as possible.
I know there are cavity toilets out there, but I dont want to rip down the wall, move wall studs and change the plumbing.
Anyone had similiar toilet size problems or could suggest some brands that make a narrower toilet? Thanks in advance!
-
26th July 2007, 03:33 PM #2
I have a similar issue, so
I may not have gone where I intended to go, but I think I have ended up where I needed to be.
My Other Toys
-
26th July 2007, 03:38 PM #3
What's on the other side of the wall?
"I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
26th July 2007, 03:47 PM #4
As in behind the toilet? Its the exterior wall. the wall you face when you are sitting down is the bedroom wall.
-
26th July 2007, 03:53 PM #5
OK, well you can get remote cisterns which go on the other side of the wall, so what about something like that? Then you only need room for the pan in the bathroom.
"I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
26th July 2007, 04:02 PM #6
I'll look into it, but this would no doubt still involve replumbing the cistern filler (sorry don't know the techincal name) and not to mention the rest of the toilet plumbing. As in life, I was looking for a quick easy fix, a toilet that was narrower than the standard ones. A slimline Cistern would be brilliant if there is one that doesnt have to be jammed in the wall...
-
26th July 2007, 04:05 PM #7As in life, I was looking for a quick easy fix
Sometimes the best way is not the easiest...
I suggest you start visiting plumbing supply places with a tape measure. There are some very slimline toilets around these days. The only problem is you might have trouble getting one to fit your existing floor plumbing, which is probably set up for a standard pan."I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
26th July 2007, 04:11 PM #8
Thanks SilentC. I planned on doing that anyway, I just thought someone out there had already travelled the path. Surely I cant be the only one with this little problem.
-
26th July 2007, 04:20 PM #9
Well, 1100 is a bit on the narrow side, but I've been in bathrooms smaller than that in Sydney terraces. Best of luck with it.
"I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
26th July 2007, 04:23 PM #10
Is there any way you can change the door entrance to be in between the toilet and shower? I have seen a toilet in Mitre 10 which didnt seem to protrude as far out from the wall as the others, will have a look when i am in next. I also saw on one reno show (english i think) where their toilet was actually a corner toilet, very different!
Donna
-
26th July 2007, 04:30 PM #11
Nah, then we'd be entering through the built in cupboard. Could look good though, kinda like a secret room - straight out of a superhero movie!!
Ill check out Bunnings this weekend too. If I am not home or at work I can usually be found there. sad i know.
-
26th July 2007, 04:35 PM #12
A corner loo, found on this site http://www.abltilecentre.com.au/gallery.html
Donna
-
26th July 2007, 04:35 PM #13
-
26th July 2007, 04:39 PM #14
That's how we get into ours. But our 'built in cupboard' is a 2m square room!
Justin, something you need to be aware of is that the pan connectors on those modern close-coupled toilets are often closer to the wall than they are on a standard pan. That means that you might find that even if you can get a compact toilet, you'll still need to change the plumbing because the hole in the floor will be in the wrong place. It's not necessarily going to be a drop in replacement."I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
26th July 2007, 04:53 PM #15
1: Flyn - seen those already. they are an awesome idea. problem is our dunny is in the middle of the room. Vanity is it the corner.
2: Walk in wardrobe: use to have one, we ripped it out to turn out 1.5m ensuite into a 3.5m ensuite with nice big shower. So that idea is certainly out. If I suggested putting it back in, strewf Ill be living there on my own as she will definately leave me... now theres a tho... no stop thinking like that....
3: Aware of the different sewer placements. mines at least pretty common. 180mm from the wall to centre of trap. Alot toilets out there that are adjustable 140-230mm - so at least I fit in the middle of that.
4: Yep, alot of hope so's, whatifs and maybe's but hey thats why I am here picking all your brains.
Similar Threads
-
A swinging toilet?
By Mcblurter in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 10Last Post: 11th September 2006, 10:17 PM -
How to most out of a Small bathroom?
By Ayesha in forum KITCHENS, BATHROOMS, THEATRES, etcReplies: 13Last Post: 21st August 2006, 08:17 PM -
Dunny advice
By jasonbrisbane in forum KITCHENS, BATHROOMS, THEATRES, etcReplies: 1Last Post: 6th July 2006, 11:14 AM
Bookmarks