Results 1 to 7 of 7
-
26th July 2007, 11:21 AM #1GOLD MEMBER
- Join Date
- Aug 2004
- Location
- Perth WA
- Posts
- 355
Keeping My Fingers Crossed - Roof Drainaged
Alright here in Perth we haven't had much rain this year to date. But the few heavy down pours that we have had has over flowed the guttering and flooded back inside the house, because the front of the gutter is higher than the back. Its a new house that I'm building. The main area of concern is an alcove which has a 3m long section of guttering into which all the water from a 12m wide x 8m high/deep (bit of a diamond shape between two valley's) roof area flows into.
With the third flooding (this last Saturday) it showed the leaf litter, with what there was of it, that it was right up and over the top of the guttering.
I hate guttering. What do I do... rip it all off... persist with it... put holes in the front of the guttering... seems a possiblity, just drill holes or slots, so I thought about it over night. Rain was forecasted for Sunday.
I decided on slots. So bright and early Sunday morning I set up and cut horizontal slots 40mm x 8mm every 200mm in this 3m section of guttering. We had a heavy down pour Sunday evening. The rain water gushed from the slots, so it appears to have worked.
With hindsight I should have went for guttering where the front is smaller than the back or the stuff that has slots pressed/cut in it.
-
26th July 2007, 11:46 AM #2
I've never even seen guttering thats higher at the front than the back without being slotted. Sounds like you may need more down pipes too, and round ones work way better than rectangular.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
26th July 2007, 12:00 PM #3GOLD MEMBER
- Join Date
- Aug 2004
- Location
- Perth WA
- Posts
- 355
Have you led a sheltered life have a look at these http://www.combinedmetalind.com.au/Brochure/gutter.pdf
-
26th July 2007, 12:04 PM #4
Yep my first thought was more downpipes. You need a downpipe within a couple of metres of every valley for a start.
My gutter has overflow slots. I have seen water coming out of them in heavy downpours (even with the regulation number of downpipes ) so they're worth having."I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
26th July 2007, 12:31 PM #5
-
26th July 2007, 01:08 PM #6
I have to agree with Mick -stupid..
Not just forcing water back on to the barge board or worse.. it inhibits leaves from sliding out.
Can you just bend your support brackets so the front is lower than the back?
This will protect the bargeboard but you should still neeed to address the underlying problem of downpipes
-
26th July 2007, 02:05 PM #7GOLD MEMBER
- Join Date
- Aug 2004
- Location
- Perth WA
- Posts
- 355
Similar Threads
-
Fingers Crossed - Again.
By keith53 in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 14Last Post: 1st December 2006, 09:40 PM -
Fingers crossed.
By Cliff Rogers in forum Hatches, Matches & Dispatches. Birthday greetings and other Touchie-feelie stuff.Replies: 114Last Post: 1st December 2006, 08:54 PM -
pergola roof over tile house roof
By Lbudgie in forum PERGOAS, GAZEBOS, STROMBELLAS & ROTUNDASReplies: 3Last Post: 24th March 2006, 05:58 PM -
Why the chicken crossed the road.
By soundman in forum JOKESReplies: 5Last Post: 9th May 2005, 07:08 PM -
Long span garage roof deck, more thoughts
By Wildman in forum DECKINGReplies: 4Last Post: 29th September 2004, 08:00 PM
Bookmarks