Results 1 to 5 of 5
-
19th July 2007, 08:51 AM #1Novice
- Join Date
- Jul 2006
- Location
- Australia
- Posts
- 19
opinions on pre-finished wooden flooring
Just after somo pros and cons of pre-finished floating wooden flooring (Verneered not laminiate) from any one who has experienced this type of product.We are looking at doing our kitchen family room , D.I.Y tips on laying and any other comments welcomed.
-
27th July 2007, 12:37 PM #2rob
- Join Date
- May 2007
- Location
- mayland W.A
- Posts
- 137
Hi zendo
Will to start your are on the right track stay well clear of laminates they are crap and if you have a leak in the kitchen they will swell as they have a MDF or HDF core .I would rather lay cardboard on the floor than use them . (but they are great for rentals )
i have done quite a lot of research into this subject when i but my floor down and i ended up paying a bit more and going for two strip Boral Blackbutt .It looks amasing and is super hard wearing . i left the leftovers outside in the rain for two weeks and once it dryed you could not see that it had been drenched .
Personally i would uses one or two strip and long boards did not like the three strip as you can see the joins .
also it pays to go over the tongue edges of the boards with a mini plans so there lock together better .
best of luck
-
1st August 2007, 03:36 PM #3New Member
- Join Date
- Aug 2007
- Location
- Toowoomba
- Posts
- 2
Have you costed up and real timber t&g floor, i've managed to get them in for a reasonable cost compared to a quality timber floater.
Do some ringing around for overlay timber and compare the differance, the service life is far better from solid timber, but if your going to sell up go the cheaper option.Shawn.
woodnfloors.com.au
-
7th August 2007, 07:11 PM #4Intermediate Member
- Join Date
- Apr 2004
- Location
- Parkdale Vic
- Age
- 73
- Posts
- 26
PreFinished flooring
I saw a very expensive prefinished (banboo) flooring that was being laid. There was a very slight variation in the depth of each board. This difference could be felt by the bare hand (or bare feet). It really needed to be resanded, somewhat negating the prefinishing.
-
10th August 2007, 11:53 AM #5Senior Member
- Join Date
- Mar 2005
- Location
- Melbourne
- Posts
- 135
I've just finished putting down over 100 sq.m. of Trueloc yellow stringy bark on an acoustic underlay. Looks and feels great and was a breeze to put down. I was most impressed with the quality control and precision of the product. It end locks as well as side locks and fitted together perfectly.I layed the lot in a couple of days, no mess, no fuss, finish guaranteed, which was the main reason I went down the floater path in the first place.
However I have opted for lino in the kitchen. For some reason I don't trust a floating floor in an area like that.
Similar Threads
-
Advice on wood flooring in a Unit
By mshannon in forum FLOORINGReplies: 5Last Post: 31st May 2006, 09:06 PM -
Pre - Finished Merbau 120 x 18
By mickqld in forum FLOORING, DECKING, STUMPS, etc.Replies: 3Last Post: 16th November 2005, 01:10 PM -
How do I attach real wooden flooring on to concrete?
By mindi_007 in forum FLOORINGReplies: 18Last Post: 10th September 2004, 10:50 PM -
Alternitives to wooden flooring ?
By sean@oz in forum FLOORINGReplies: 7Last Post: 12th August 2003, 03:19 PM
Bookmarks