Page 1 of 2 12 LastLast
Results 1 to 15 of 16
  1. #1
    Join Date
    Jul 2006
    Location
    Newcastle
    Posts
    0

    Default Low Timber Landscaping...

    I finished this piece of "Timber Landscaping" Last weekend.

    Thought I'd post up a few picts.

    Cheers - Ph.

  2. #2
    Join Date
    Jul 2006
    Location
    Newcastle
    Posts
    0

    Default

    I moved the BBQ in this Weekend.

    (The Missus moved the plants in too........)

  3. #3
    Join Date
    Nov 2001
    Location
    Parkside - South Australia
    Age
    46
    Posts
    479

    Default

    Looks great .... no water restrictions I assume
    Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.

  4. #4
    Join Date
    Jul 2006
    Location
    Newcastle
    Posts
    0

    Default

    Quote Originally Posted by Sir Stinkalot View Post
    Looks great .... no water restrictions I assume
    Its catch 22, but in a good way. We've had so much rain, we don't need to water the garden......

  5. #5
    Join Date
    Jul 2003
    Posts
    85

    Default

    Dear Purpleheart,

    Great job and the whole project has come together very nicely. If I could offer one small suggestion. The plant pot dishes sitting directly on the deck will soon leave a black mark on the deck which will be nearly impossible to remove. I encounter this weekly on decks and have yet been able to remove the black stain using oxalic acid or by sanding. The black stain tends to permeate deep.If left long enough the timber will start to degrade. If the boss of the house wants the plants in the pots on the deck ,see if you can gently encourage her to add three or four feet to get the drainage plate off the deck. The feet will also tend to leave black marks but not as badly. Perhaps the best method(although not as Stylish) are the metal frames that have small caster wheels. These tend not to mark the deck. While I am at it another culprit in leaving black marks is the bottom round ring from the BBQ gas cylinder and many of the cheap steel frame outdoor furniture sets. Once again your project looks stunning,

    jimj www.restore-a-deck.com.au

  6. #6
    Join Date
    Oct 2006
    Location
    Tallahassee FL USA
    Age
    82
    Posts
    0

    Default

    Very crisp detailing, Ph. Beautiful lawn, too.

    Joe
    Of course truth is stranger than fiction.
    Fiction has to make sense. - Mark Twain

  7. #7
    Join Date
    Jul 2006
    Location
    Newcastle
    Posts
    0

    Default

    Hey jimj.

    Thanks for the comments, and you have some very good points there. Unfortunately, I am familiar with the markings the pots tend to leave behind. I will definately give some thought as to what to do about it this time.

    Have a look at pict 1, some decking we built about 2 and a half years ago.

    Picts 2 and 3, well weathered, and tell tale pot stain. All the gloop that filteres through the potting mix certainly doesen't help, and when the pots are outside and it rains, the water just overflows and pools around. About all we can do with that one is put the pot back there again after re-oiling. Fortunately no marking from the bbq, as it is well protected by the cover a mate made for me.

    Pict 4 - My design for a saucer that just drains excess water off the edge of the deck. Anyone good at pottery, make a few of these and you'll be a millionaire. (Well, I'll buy half a dozen anyway).

    Hey Joe, gotta give the props for the lawn to the missus. She pretty much looks after that, she even mows it too. All I do is the edges. I'm at Newcastle, and we have had such good sun and rain this summer, I can't remember the last time the garden needed any watering. Very Lucky !!!

    Cheers - Ph

  8. #8
    Join Date
    Jan 2007
    Location
    Melbourne
    Posts
    18

    Default

    Well done looks great, what type of turf is it?

  9. #9
    Join Date
    Jul 2006
    Location
    Newcastle
    Posts
    0

    Default

    Quote Originally Posted by want2learn View Post
    what type of turf is it?
    Buffalo.

  10. #10
    Join Date
    Dec 2004
    Location
    Northen Rivers NSW
    Age
    58
    Posts
    758

    Default

    Quote Originally Posted by Purpleheart View Post
    Buffalo.
    Sir Walter


  11. #11
    Join Date
    Jul 2006
    Location
    Newcastle
    Posts
    0

    Default

    Quote Originally Posted by dazzler View Post
    Sir Walter
    Honestly, I can't tell you.

    When we moved in about 8 years ago, it was probably 45% Kikuyu, 45% weeds and 10% Buffalous Unknownus.

    After years of weeding etc etc, its about 99% buffalo now.

    Its definately an older variety, not like what you see these days.

    Someone once told me it was called something like "Seasalt Buffalo", but I had never heard of that either. Sorry...

  12. #12
    Join Date
    Oct 2006
    Location
    perth
    Posts
    196

    Default

    Hi Purpleheart

    All I can say is - It looks really great, well done

    Celeste

  13. #13
    Join Date
    Jul 2006
    Location
    Newcastle
    Posts
    0

    Default

    Took jimjs advice.

    Pots now equiped with feet. Only a couple of dollars from Bunnings.

    Cheers Mate.

  14. #14
    Join Date
    Jun 2007
    Location
    bracken ridge
    Posts
    5

    Default nail offset

    Looks good mate nice decking wood.

    I notice you nailed the planks on in a straight line, on some other posts they recommend offsetting the nails to avoid splitting. I'm just building a small ground deck at the moment. Personnally i prefer the straight look but obviously dont want any splitting problems. Did you get any?

  15. #15
    Join Date
    Jul 2006
    Location
    Newcastle
    Posts
    0

    Default

    Quote Originally Posted by dazbeer View Post
    Looks good mate nice decking wood.

    I notice you nailed the planks on in a straight line, on some other posts they recommend offsetting the nails to avoid splitting. I'm just building a small ground deck at the moment. Personnally i prefer the straight look but obviously dont want any splitting problems. Did you get any?
    No probs with splitting. All painstakingly pre-drilled and knocked in by hand !!

Similar Threads

  1. Deceptive timber
    By Suresh in forum HAVE YOUR SAY
    Replies: 1
    Last Post: 17th September 2005, 12:42 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •