Results 1 to 3 of 3
  1. #1
    Join Date
    Jan 2005
    Location
    Central West, NSW
    Age
    50
    Posts
    31

    Default Staining timber windows

    I have just had the Meranti windows installed into our new house and figured I had best seal the exterior prompt.

    I was sold some Feast Watson Weatherproof as I was told this was the only stain to offer UV protection for un-pigmented timber. Is this correct?

    I was also told to apply 1-2 coats. Not bothering to look at the can until I get home I noticed it said 4-6 coats for exterior. Should I do one or the other or anywhere in between?

  2. #2
    Join Date
    Mar 2007
    Location
    Sydney
    Posts
    4

    Default

    this is an old post and its probably a bit late, but if you don't want continuing regular maintenance do not use a clear finish outside. I often got asked for clear external finishes by my clients and refused to advise in favour.

    Then I had the option to try some on my own place in a very exposed location. I used it as a trial with differing products. Recoating was required in 2 years for all products, so my advice remains , don't do it.

  3. #3
    Join Date
    Jan 2005
    Location
    Central West, NSW
    Age
    50
    Posts
    31

    Default

    Thanks for the reply Phils.

    I posted the question yesterday so you reply may just be in time.

    Would you recommend a tinted stain?

    Cheers

Similar Threads

  1. timber for windows
    By gangnail in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 3
    Last Post: 2nd January 2007, 08:00 AM
  2. Deceptive timber
    By Suresh in forum HAVE YOUR SAY
    Replies: 1
    Last Post: 17th September 2005, 12:42 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •