Results 1 to 5 of 5
-
9th January 2007, 05:26 PM #1
Senior Member
- Join Date
- Oct 2006
- Location
- australia
- Posts
- 175
Wondering.. Faucet that tilts up?
I was wondering if you can get a kitchen faucet that tilts up.
For eg, if you are filling a bucket, it would be handy to be able to lift the faucet up to get the bucket back out when filled.
Hope that makes sense.
Are these invented yet? If so what are they called?
-
9th January 2007, 07:29 PM #2
SENIOR MEMBER
- Join Date
- Aug 2005
- Location
- Victoria
- Posts
- 412
You can get a tap with a retractable hose that you could pull out of the holder, allowing you to get the bucket out.
Tools
-
9th January 2007, 07:48 PM #3
Ex T. A.
- Join Date
- Aug 2006
- Location
- Regional South Australia
- Age
- 46
- Posts
- 60
Does it have to tilt up? I have a mixer tap that can be swung to the side (installed on the corner of the sink) out of the way of the sink.
Do not meddle in the affairs of dragons,
for you are crunchy and taste good with ketchup.
.......................
.......................
-
9th January 2007, 10:19 PM #4
Alien in a Strange Land
- Join Date
- Jun 2006
- Location
- Barboursville, Virginia USA
- Age
- 78
- Posts
- 549
Two possibilities:
As Tools said, a tap with a retractable hose. I have one and you don't even need to put the bucket in the sink at all, just "take the tap to the bucket."
Or, there are high-arching taps which will clear the top of a bucket. Just swing it out of the way (as Tameriska said), insert bucket, fill, swing, lift out bucket.
Both are readily available.
Cheers,
Bob
-
9th January 2007, 10:32 PM #5
Senior Member
- Join Date
- Oct 2006
- Location
- australia
- Posts
- 175
Thanks guys, that's really awesome.
I will have to go look at the ones you described so I know which one to pick!
btw it's for a faucet with separate hot and cold taps. But I don't think that will make a difference. Might be less of a choice in finishes, but that could be a good thing.
Bookmarks