Results 1 to 4 of 4
Thread: Concrete floor uneven for tiling
-
29th December 2006, 06:27 PM #1New Member
- Join Date
- Dec 2006
- Location
- home hill
- Posts
- 2
Concrete floor uneven for tiling
Hi,
I Have a patio that i wish to tile but the floor was poured in two sections and the last is higher by about 20mls in the middle.
Would a Tile Levelling Compound fix this problem.
Many Thanks
Troy2
-
29th December 2006, 07:33 PM #2New Member
- Join Date
- Dec 2006
- Location
- Dubbo
- Posts
- 1
20mm is outside the scope of these floor levelling compounds. The joint will also crack the tiles eventually.
-
29th December 2006, 08:07 PM #3Member
- Join Date
- Jun 2006
- Location
- melbourne
- Posts
- 77
hello,
best to do a sand and cement screed, fairly dry mix
I would also put an expansion joint where the joint is
regards
myla
-
31st December 2006, 12:04 PM #4New Member
- Join Date
- Dec 2006
- Location
- home hill
- Posts
- 2
Similar Threads
-
deck ontop of concrete steps
By oricenap in forum CONCRETINGReplies: 2Last Post: 25th June 2007, 09:25 PM -
Timber in concrete
By spartan in forum CONCRETINGReplies: 1Last Post: 2nd November 2006, 01:25 PM -
How to concrete posts/brackets into place?
By ptyltd in forum CONCRETINGReplies: 5Last Post: 20th January 2006, 01:07 PM -
Concrete Footings...Is there a better way?
By Flyboy in forum CONCRETINGReplies: 38Last Post: 4th September 2005, 06:19 PM -
Concrete over concrete
By Sir Stinkalot in forum CONCRETINGReplies: 4Last Post: 18th July 2003, 10:59 PM
Bookmarks