Results 1 to 9 of 9
Thread: Pergola Span
-
21st November 2006, 09:26 PM #1New Member
- Join Date
- Nov 2006
- Location
- Melbourne
- Posts
- 3
Pergola Span
Hi there, I have spoken to many people about a pergola I would like to have built. I would like the pergola to come out 6m from the house but I have been told that I can have this but I have to have centre posts to support this. Can someone please let me know if I can go 6m wide without having any centre supports ?
-
21st November 2006, 09:31 PM #2Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 4,816
What sort of roof are you going to have, flat or pitched?
Edit: and roof covering material?
Al
-
21st November 2006, 09:41 PM #3New Member
- Join Date
- Nov 2006
- Location
- Melbourne
- Posts
- 3
I would like a flat roof with polycsrb rofing covering reed fencing for a balanese look. The polycarb to keep out the rain. I have a picture but I dont know how to post it.
-
21st November 2006, 09:44 PM #4New Member
- Join Date
- Nov 2006
- Location
- Melbourne
- Posts
- 3
http://melisou1.blogspot.com/
I was able to post the pics on the above link
-
21st November 2006, 10:01 PM #5Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 4,816
If you want single span at 6M, the tables I have suggest f7 ( Oregon) at 300x75mm. :eek:
Which is one hell of a lump of timber.
Why not pitch the roof and have collar ties, you will still have clear space under the pergola.
Al
-
21st November 2006, 10:04 PM #6
I've seen plenty around that size without centre supports but you have to have the right size beams etc.
A poly carb roof isn't heavy. Blowing off is more of a concern than falling down.If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
-
21st November 2006, 10:07 PM #7
For something like that, steel C-150 would span 6 metres with you batten on top, but then you would have to disguise the steel somehow.
Have a nice day - Cheers
-
21st November 2006, 11:05 PM #8Member
- Join Date
- Sep 2004
- Location
- Victoria
- Posts
- 5
Having spent about $1000 dollars and several hours with Polycarb and having compared the available brands I can tell you that a 5 degree pitch is required with pretty much all polycarb. That would be about 530mm fall over a 6m span so a 'flat' pergola with polycarb may not be possible!
Cheers
SN
-
22nd November 2006, 04:17 PM #9Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 1,460
I have a 200mm fall over 4.8 metres and provided that you get the large valley type that fall is okay as the fall is only to get the heavy downpour to drain away before the wind drives it over the corrugation between the sheets.
So with proper design and the fall going both ways from the centre it can be near flat.
Peter.
Similar Threads
-
pergola roof over tile house roof
By Lbudgie in forum PERGOAS, GAZEBOS, STROMBELLAS & ROTUNDASReplies: 3Last Post: 24th March 2006, 05:58 PM -
Long span garage roof deck, more thoughts
By Wildman in forum DECKINGReplies: 4Last Post: 29th September 2004, 08:00 PM -
Pergola - keeping the rafters straight when the span is 5m
By Nevtek in forum PERGOAS, GAZEBOS, STROMBELLAS & ROTUNDASReplies: 4Last Post: 5th May 2004, 03:28 PM -
Pergola prob;ems
By Iain in forum PERGOAS, GAZEBOS, STROMBELLAS & ROTUNDASReplies: 1Last Post: 9th May 2002, 01:01 AM
Bookmarks