Results 1 to 6 of 6
Thread: woodworking channel
-
21st September 2006, 09:34 PM #1
woodworking channel
Hi,
When watching the DIY woodworking channel the adds are always bright and clear and the actual woodworking video is very dark and hard to see.
Do other members have the same problem or is there a simple trick to rectify the problem. There is no problem with the sound.
Hope someone has some advice.
Terry
-
15th December 2006, 05:55 PM #2
hi..... I know you postaed ages ago but I just got Austar but see no woodworking channel...... please let me know where I can find it - thanks
Steve
Kilmore (Melbourne-ish)
Australia
....catchy phrase here
-
15th December 2006, 06:21 PM #3
http://www.thewoodworkingchannel.com/
This is an internet streaming video site that transmits woodworking shows 24/7.
I think you may be looking on cable TV.
John
-
16th December 2006, 11:41 AM #4
I think you will find the adverts are probably professionally produced with proper studio lighting etc whereas some of the shows and segments (not all of course) are a bit more home-video-like but that is likely the reason. i don't think you can change it, unless your display is a little on the dull side to begin with?
How much wood could the woodchuck chuck if the woodchuck could chuck wood?
-
17th March 2007, 12:14 PM #5
Is there any audio with the chanel?
Is there any audio with the chanel?
-
17th March 2007, 12:18 PM #6
Yep there is audio.
It works best with a high speed broadband. I have bigpond 1500 somethings with 526 somethings and it is cool
Bookmarks