Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4

Thread: Tool Guide

  1. #1
    Join Date
    Apr 2004
    Location
    Werribee, Vic
    Age
    67
    Posts
    1,312
    Post Thanks / Like

    Default Tool Guide

    Probably seen this before but.........


    Great tips for knowing your "tools" for all us non trades types hey and
    what the hell and some tradies.

    Tool Definitions


    DRILL PRESS: A tall upright machine useful for suddenly snatching flat
    metal bar stock out of your hands so that it smacks you in the chest
    and flings your beer across the room, splattering it against that
    freshly painted part you were drying.

    WIRE WHEEL: Cleans paint off bolts and then throws them somewhere under
    the workbench with the speed of light. Also removes fingerprint whorls
    and hard-earned guitar calluses in about the time it takes you to say,
    "Ouch..."

    ELECTRIC HAND DRILL: Normally used for spinning pop rivets in their
    holes until you die of old age.

    PLIERS: Used to round off bolt heads.

    HACKSAW: One of a family of cutting tools built on the Ouija board
    principle. It transforms human energy into a crooked, unpredictable
    motion, and the more you attempt to influence its course, the more
    dismal your future becomes.

    VISE-GRIPS: Used to round off bolt heads. If nothing else is available,
    they can also be used to transfer intense welding heat to the palm of
    your hand.

    OXYACETYLENE TORCH: Used almost entirely for lighting various flammable
    objects in your shop on fire. Also handy for igniting the grease inside
    the wheel hub you want the bearing race out of.

    WHITWORTH SOCKETS: Once used for working on older British cars and
    motorcycles, they are now used mainly for impersonating that 9/16" or
    1/2" socket you've been searching for the last 15 minutes.

    HYDRAULIC FLOOR JACK: Used for lowering a car to the ground
    after you have installed your new disk brake pads, trapping the jack
    handle firmly under the bumper.

    EIGHT-FOOT LONG DOUGLAS FIR 2X4: Used for levering a car upward
    off a hydraulic jack handle.

    TWEEZERS: A tool for removing wood splinters.

    PHONE: Tool for calling your neighbours to see if he has another
    hydraulic floor jack.

    SNAP-ON GASKET SCRAPER: Theoretically useful as a sandwich tool for
    spreading peanut butter; used mainly for getting dog crap off your boot.

    E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known
    drill bit that snaps off in bolt holes you couldn't use anyway.

    TWO-TON ENGINE HOIST: A tool for testing the tensile strength on
    everything you forgot to disconnect.

    CRAFTSMAN 1/2" x 16-INCH SCREWDRIVER: A large pry bar that inexplicably
    has an accurately machined screwdriver tip on the end opposite the handle.

    AVIATION METAL SNIPS: See hacksaw.

    TROUBLE LIGHT: The home mechanic's own tanning booth. Sometimes called
    a drop light, it is a good source of vitamin D, "the sunshine vitamin,"
    which is not otherwise found under cars at night. Health benefits
    aside, it's main purpose is to consume 40-watt light bulbs at about the
    same rate that 105-mm howitzer shells might be used during, say, the
    first few hours of the Battle of the Bulge. More often dark than light,
    its name is somewhat misleading.

    PHILLIPS SCREWDRIVER: Normally used to stab the lids of old-style
    paper-and-tin oil cans and splash oil on your shirt; but can also be
    used, as the name implies, to strip out Phillips screw heads.

    AIR COMPRESSOR: A machine that takes energy produced in a coal-burning
    power plant 200 miles away and transforms it into compressed air that
    travels by hose to a Chicago Pneumatic impact wrench that grips rusty
    bolts last over tightened 58 years ago by someone at ERCO, and neatly
    rounds off their heads.

    PRY BAR: A tool used to crumple the metal surrounding that clip or
    bracket you needed to remove in order to replace a .50 cent part.

    HOSE CUTTER: A tool used to cut hoses too short.

    HAMMER: Originally employed as a weapon of war, the hammer nowadays is
    used as a kind of divining rod to locate the most expensive parts not
    far from the object we are trying to hit.

    MECHANIC'S KNIFE: Used to open and slice through the contents of
    cardboard cartons delivered to your front door; works particularly well
    on contents such as seats, vinyl records, liquids in plastic bottles,
    collector magazines, refund checks, and rubber or plastic parts.

    F**KIT TOOL: Any handy tool that you grab and throw across the garage
    while yelling "F**KIT" at the top of your lungs. It is also the next
    tool that you will need.

    EXPLETIVE: A balm, usually applied verbally in hindsight, which somehow
    eases those pains and indignities following our every deficiency in
    foresight.

  2. #2
    Join Date
    Apr 2004
    Location
    Werribee, Vic
    Age
    67
    Posts
    1,312
    Post Thanks / Like

    Default

    Yes, not sure what application caused the incorrect ASCII code but only noticed it after it was posted, and being a lazy barstool I just left it.


    For those who missed it dont worry lol fixed now. # was there instead of spaces

  3. #3
    Join Date
    May 2004
    Location
    Pakenham, outer Melb SE suburb, Vic
    Age
    55
    Posts
    549
    Post Thanks / Like

    Default

    Good 'un Benny


    The beatings will continue until morale improves.

  4. #4
    Join Date
    Jul 2000
    Location
    Drop Bear Capital of Gippsland (Lang Lang) Vic Australia
    Age
    75
    Posts
    2,238
    Post Thanks / Like

    Default

    None of it is true, I checked ebay and theres none for sale
    Stupidity kills. Absolute stupidity kills absolutely.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •