



Results 1 to 15 of 17
Thread: building my own shed
-
12th July 2006, 08:58 PM #1
building my own shed
Hi all
I have decided to build my own garden shed since I found out that a 6m x 3m colourbond one would cost me $1900. I want to build one using timber frame and pine tongue and groove planks for wall covering. I estimate the whole job to cost under $1500. Is there any one who may have done a similar project? Iam worried that pine tongue and groove planks are not a good idea.Any tips and hints would be much appreciated.
-
12th July 2006, 09:02 PM #2
6x3 is a single garage.
$1500 sounds awfully cheap for materials for something that size.
As for raw pine outside, I wouldn't. Have a look at the various types of external cladding just for this purpose.
-
12th July 2006, 10:20 PM #3
Sounds way too cheap...
I wouldnt use untreated pine outside, would be better to use hardiplank.(prob cheaper to)
Why not buy 2 3x3m garden kits sheds and join them together?....................................................................
-
12th July 2006, 10:33 PM #4
Pine t&g is unsuitable for cladding
Untreated pine is only suitable indoors
Treated pine is less likely to decay but it will still expand & contract significantly when it is wet or dry. You could expect 120mm wide board to move by 6mm between wet and dry conditions. So T&G won't work.
You could use horizontal weatherboards (cedar or baltic pine)
or vertical treated pine palings (if you can get long enough ones)
-
13th July 2006, 09:49 AM #5
Originally Posted by Harry72
Not tall enough.
Dependable sheds here in Toowoomba
I can get a mid-range quality i.e. zincalume[sp?], 6m x 4m garden shed 2.7 m high for around $2000, double doors extra.
cheers
WendyBox Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
-
13th July 2006, 09:56 AM #6
I think under 2 grand for a 6x3 is pretty reasonable. If you want to build one however, you could consider cladding like Weathertex boards. They look good, don't rot or warp and you paint them any colour you like, just like normal weatherboards. Like the others who have posted, I'd be surprised if you could do it under the colourbond price however.
If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
-
13th July 2006, 10:00 AM #7
thanks for the advice guys.
I will focus on using hardiplank. Might check out some of the local auctions.I still beleive I can put it together for around $1500. If it blows out, atleast I can say I built it from scratch.
-
13th July 2006, 12:39 PM #8
Originally Posted by rufflyrustic
How much wood could the woodchuck chuck if the woodchuck could chuck wood?
-
13th July 2006, 02:37 PM #9
No unfortunately
Dependable Sheds
318 Anzac Ave Toowoomba QLD 4350
ph: (07) 4614 0488
Cheers
WendyBox Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
-
25th July 2006, 08:15 PM #10
building my own shed - update
I've built my shed frame using 75x35's i bought at bunnings ( $198.00 )
Cladding will cost me $605.00. Still have the trussers to put together.
Roofing,guthers and so on.
All is on target, even though the coucil slugged me $522.00 for approval.:mad:
Starting the slab next week.
-
25th July 2006, 08:27 PM #11
Wow - I checked with my council when i built mine, and no approval was required at all.
My 6x3 cost <$900 as a kitset, so you must be looking at some expensive sheds. (Granted it is only galv, not colourbond, but the money saved got spent inside on toys)."Clear, Ease Springs"
www.Stu's Shed.com
-
25th July 2006, 08:54 PM #12
Poured the slab for a 4m x 4m extension last weekend to what is a very tiny shed. Somehow after frame, iron, flashing, gutters etc have all been added up I would be very surprised if it works out cheaper than a kit. In this case a shop built will not work with the existing building, all 3.6 x 2.7 of it. The steel buying power of the kit builders gives them a very good cost advantage.
-
26th July 2006, 01:10 PM #13
Originally Posted by stuart_lees
Enough crying, the shed i got quoted on was a 6m x 3m colourbond shed, double sliding doors, 2 clear panels in the roof and colour matching on window and door trims. $1900 and i would have to put it up myself.
it's going to face our entertaining area so it needs to look nice,i'm going for sort of a cottage look.
.....Replying to the private message i got, i will email you my roof trussers plan as soon as i draw them up again, i had them outside on the table and my wife cleaned up. Boy am i going to blow the budget on the biggest lock i can get my hands on
-
26th July 2006, 02:18 PM #14
Originally Posted by D-I-Yer
As for that lock, it's only as good as your hiding place for the keyas my HWMBO knows from experience
cheers
WendyBox Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
-
26th July 2006, 07:41 PM #15
Originally Posted by rufflyrustic
ok ok too much tv
Similar Threads
-
Fitting out the new shed
By TommyC in forum THE GARDEN SHEDReplies: 9Last Post: 20th September 2006, 06:08 PM -
help with shed building...
By hsvls1255 in forum THE GARDEN SHEDReplies: 1Last Post: 31st May 2004, 11:08 AM
Bookmarks