Results 1 to 9 of 9
  1. #1
    Join Date
    Jul 2004
    Location
    Launceston, Tasmania
    Age
    59
    Posts
    0

    Default Finish for Huon Pine Table

    Looking for information on a non-yellowing lacquer for use on table tops.

    In particular for use on Huon Pine?

    Have previously used Wattyl Stylwood, but found it a bit yellow.

  2. #2
    Join Date
    Feb 2005
    Location
    East Bentleigh, Melbourne, Vic
    Age
    68
    Posts
    180

    Default

    De waxed shellac & wax on top?

  3. #3
    Join Date
    Nov 2004
    Location
    Redlands area, Brisbane
    Posts
    93

    Default

    All finishes yellow to some degree. The least yellow (as Steve suggested) is probably dewaxed shellac. I've used the UBeaut stuff on Huon Pine and it does look terrific.

  4. #4
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816

    Default

    Quote Originally Posted by markharrison
    All finishes yellow to some degree. The least yellow (as Steve suggested) is probably dewaxed shellac. I've used the UBeaut stuff on Huon Pine and it does look terrific.
    Is that the Blonde shellac, I have used that on Huon.

    Al

  5. #5
    Join Date
    Dec 2004
    Location
    Northen Rivers NSW
    Age
    58
    Posts
    758

    Default

    Hi

    What about burnishing with china wood oil?

    cheers

    dazzler


  6. #6
    Join Date
    Nov 2004
    Location
    Redlands area, Brisbane
    Posts
    93

    Default

    Quote Originally Posted by ozwinner
    Is that the Blonde shellac, I have used that on Huon.
    Check the link, but yes.

  7. #7
    Join Date
    Nov 2004
    Location
    Redlands area, Brisbane
    Posts
    93

    Default

    Quote Originally Posted by dazzler
    What about burnishing with china wood oil?
    If you don't want a yellow finish (the stated goal), this would be, ahem, a sub-optimum idea. Even Organoil (which is considerably lighter in colour than Tung Oil) will greatly yellow Huon Pine. It gets worse over time as well.

    I know, I've done it.

  8. #8
    Join Date
    Jul 2004
    Location
    Launceston, Tasmania
    Age
    59
    Posts
    0

    Default

    Thanks everyone for the information, I will have to give shellac a try.

    I was looking for a spray lacquer as I don't think the shellac will stand up to the ravages of my children.

    Mag

  9. #9
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    75
    Posts
    9,670

    Default

    Hard (dewaxed) Shellac should do the job nicely. It won't darken the colour of the timber any more than wetting it down with water (almost everything else will).

    If you want something that "will stand up to the ravages of your children" I suggest you get a harder timber for the table or teach the children to respect your furniture.

    You should also be aware that the houn is going to yellow quite dramatically with age and in a couple of years will be as dark as teak and if not properly maintained and cared for could easily become a disgusting, dark, dirty mess.

    Cheere - Neil

    I believe there is a product sold in Tas called Huon Pine Oil (or something like that) It might be worth a try if you can find some.

Similar Threads

  1. kauri pine dining table finish
    By suus in forum FINISHING
    Replies: 2
    Last Post: 24th June 2005, 10:14 PM
  2. shellac finish on coffee table
    By snappperhead in forum FINISHING
    Replies: 1
    Last Post: 15th February 2004, 06:55 PM
  3. Coffee Table finish
    By Dod in forum FINISHING
    Replies: 3
    Last Post: 11th June 2001, 10:45 PM
  4. Coffee table finish
    By Mark Woodward in forum FINISHING
    Replies: 0
    Last Post: 20th February 2000, 11:23 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •