Thanks: 1
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
9th August 2022, 11:37 AM #1
Senior Member
- Join Date
- Feb 2008
- Location
- sydney, au
- Posts
- 110
TRB001 - extra base holes and plunge siezed
I had the base plate off my TRB001 yesterday as I was trying to get the plunge to work.
It seems to be seized.
I noticed these additional holes in the base plate.
They are tapped to m4 - 0.7 from the top down, but not all the way through.
3 of the holes seem to be in a triangle pattern, but I have not been able to match them with any other router base plate holes.
Any one have any idea of what they are for.
Also need help to restore the plunge!!!!!!
TRB001 base.jpgJames,
Sydney, Australia
-
9th August 2022, 12:04 PM #2
GOLD MEMBER
- Join Date
- Nov 2009
- Location
- Canberra
- Posts
- 1,054
There is a very good description here how to disassemble the router: Dismantling the Triton TRA001 3¼HP Router
-
11th August 2022, 05:47 PM #3
On a journey
- Join Date
- Oct 2008
- Location
- Leopold, Victoria
- Age
- 65
- Posts
- 2,964
No idea what the M4 holes would be for except they may have been used for holding the base plate to machine it during the manufacturing process.
Dallas
-
24th March 2023, 03:07 PM #4
Senior Member
- Join Date
- Feb 2008
- Location
- sydney, au
- Posts
- 110
reair to TRB001
Bump...
Did not realise I had asked this question previously...
Now going to make repairs.James,
Sydney, Australia
Reply With Quote
