Thanks: 0
Likes: 2
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Hello from Woolgoolga NSW
-
10th July 2021, 05:13 PM #1
New Member
- Join Date
- Jul 2021
- Location
- Woolgoolga NSW
- Posts
- 1
Hello from Woolgoolga NSW
Hi everyone thanks for allowing me to join your group. I'm from WooIgoolga near Coffs Harbour Northern NSW Australia. I stumbled on this forum trying to get some information about an old planer but will get back to that. Im retired 68 yr old and love timber. Never a carpenter but have made small things like cupboards, coffee tables now building my first deck. Night seek some advice as I go along but have a mate who is a retired builder/carpenter who is supervising me. Back to the planer/saw it is a PaulCall vintage I wanted to use but it is 3 phase which I don't have at home. Anyway I want to get rid of it I will make another thread or look through existing to where I seen a member was after one for parts.
Thanks all
-
11th July 2021, 09:07 AM #2
Bulnesia Arborea
- Join Date
- Jun 2018
- Location
- Melbourne
- Posts
- 471
Welcome Eddie
-
12th July 2021, 04:56 PM #3
GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 69
- Posts
- 1,570
Welcome to the forum Eddie.
-
12th July 2021, 11:22 PM #4
New Member
- Join Date
- May 2021
- Location
- Stawell, Vic
- Age
- 73
- Posts
- 7
Hi there Eddie
I had 3phase in my previous workshop and hence had a lot of 3ph machinery. So when I moved and no longer had 3ph, I just found some single phase motors of same output, rpm, shaft diameter etc.
The cost of the new or used motors was offset a little by the scrap metal value of the original motors.
Just wanted to suggest an alternative to getting rid of your planer/saw. It could be worthwhile looking at the motor swap compared with having to purchase another machine.
Anyway, all the best with your new adventures
Graeme
-
13th July 2021, 04:45 AM #5
GOLD MEMBER
- Join Date
- May 2011
- Location
- FRANCE
- Age
- 59
- Posts
- 1,889
Welcome to the forum
-
13th July 2021, 10:25 PM #6
SENIOR MEMBER
- Join Date
- Jul 2004
- Location
- Adelaide
- Age
- 76
- Posts
- 425
Welcome to the forum Eddie
Regards
Keith
-
26th July 2021, 11:06 AM #7
Life's Good, Enjoy each new day & try to encourage
- Join Date
- Dec 2009
- Location
- Faulconbridge, Lower Blue Mountains
- Age
- 68
- Posts
- 2,576
G'Day & Welcome to a top forum "Eddie".
There are a stack members in and around Sydney, across NSW plus the rest of Australia and the world.....
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
Enjoy the forum......
Enjoy your woodwork......
Cheers crowie
Reply With Quote
