Thanks: 0
Likes: 9
Needs Pictures: 2
Picture(s) thanks: 2
Results 1 to 15 of 18
Thread: Dewalt DW735 planer thicknesser
-
5th December 2020, 01:35 PM #1GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 995
Dewalt DW735 planer thicknesser
I will get some pictures of the little beast later today. It's this machine. You-tuber's favourite, and a cut (or three) above the cheaper Hafco/Carbatec flavours floating around (I know 'cos I've owned a Hafco helical as well).
I will probably regret selling this as soon as it goes out the door, but I need to start decluttering and rationalising my tools. The DeWalt hasn't seen much use since I picked up my Hammer A3, so it's sitting gathering dust instead of making it. I'm worried it'll get depressed and take to strong drink. Or worse. Offered here, but I won't be upset if no-one wants it - I'd rather hang on to it than stick it on scumtree.
1800W, 13", 3 blades. DeWalt internets
In excellent condition.
Comes with a spare set of (new) blades worth $120. The blades in the machine are fine as well.
Pickup Newcastle, NSW
$850
-
7th December 2020, 07:54 PM #2GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 995
Took a little while longer to get pics - the little beast was lurking under the new workbench with approximately half a ton of plywood in the way... give or take a ton.
It's a tiny behemoth - either 42kg is getting heavier due to quantums or something, or I'm getting weaker. Anyway, should only be lifted by two people pooing:
DeWalt planer weight.jpg
Warning: contains watts:
DeWalt planer specs.jpg
It looks remarkably like a big yellow planer:
DeWalt planer front.jpg DeWalt planer low front.jpg DeWalt planer close front.jpg DeWalt planer rear.jpg DeWalt planer left.jpg DeWalt planer right side.jpg
-
7th December 2020, 08:46 PM #3Senior Member
- Join Date
- Oct 2018
- Location
- Melbourne
- Posts
- 128
Tempted. Would you consider shipping the bastard?
-
7th December 2020, 08:57 PM #4GOLD MEMBER
- Join Date
- May 2012
- Location
- Melb
- Posts
- 1,502
-
7th December 2020, 09:03 PM #5GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 995
Just my warped sense of humour: crap.jpg Screen Shot 2020-12-07 at 21.01.18.jpg
-
7th December 2020, 09:03 PM #6Senior Member
- Join Date
- Oct 2018
- Location
- Melbourne
- Posts
- 128
-
21st December 2020, 12:00 AM #7Intermediate Member
- Join Date
- Oct 2018
- Location
- sydney
- Posts
- 33
still available? assume you mean helical heads? price negotiable?
-
21st December 2020, 07:55 AM #8GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 995
It's available. Straight blades.
Everything is negotiable. Photo of wife may be required...
-
21st December 2020, 11:51 AM #9GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 3,165
I'm good for $700?
-
21st December 2020, 05:49 PM #10GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 995
I know it's Christmas but I'm not giving it away
$700 is a bit too low
-
22nd December 2020, 01:01 PM #11GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 3,165
How much is "a bit" ?
-
22nd December 2020, 08:03 PM #12GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 995
about a hundred bits... or ninety nine to make the baby Jesus' birthday special
-
23rd December 2020, 02:11 PM #13GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 3,165
The "baby" Jesus will be over 2000 years old this coming birthday and you are telling me that is only a dollars worth of special?
I'll go to $750 and I bet JC sees none of it.
-
23rd December 2020, 03:52 PM #14GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 995
I've been to the Sistine Chapel - that bugger's not short of a bob or two!
How about 775 and it's yours? 54.6% of the new price for the machine plus extra set of new blades the wife will sing even if the angels don't
-
24th December 2020, 07:24 AM #15GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 3,165
To remain true to my word I must stick to $750.