Thanks Thanks:  0
Likes Likes:  1
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 10 of 10
  1. #1
    Join Date
    Aug 2013
    Location
    Port Fairy
    Posts
    2

    Default Clogged sandpaper discs

    Trying to clean off paint on a caustic dipped door but even 40 grit disc clog up straight away. Any suggestions?

  2. #2
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    140

    Default

    Scraper

  3. #3
    Join Date
    Nov 2004
    Location
    Redlands area, Brisbane
    Posts
    93

    Default

    Have you tried a scraper to get the worst off?

    Bahco have carbide paint scrapers that are far superior to ye olden flat blade scrapers. Total Tools and all of the other usual suspects (with the exception of Bunnings) sell them.

    Bunnings have a UniPro equivalent but it is an ergonomic nightmare compared to the Bahco tools.

  4. #4
    Join Date
    Jun 2012
    Location
    Dungog
    Posts
    55

    Default

    Have you tried a hot air gun and a scraper ?

  5. #5
    Join Date
    Aug 2013
    Location
    Port Fairy
    Posts
    2

    Default

    Thanks for your help on this one

  6. #6
    Join Date
    Nov 2011
    Location
    Adelaide
    Posts
    10

    Default

    Second the Bahco 650 Ergo scraper, the thing is excellent. I bought mine to scrape a 140 year old French painted door, used a heat gun to soften the paint and an ordinary scraper, then the Bahco to get the recalcitrant stuff off. The one without the knob handle, but with straight blade, was about $35. Currently $29.99 at Syd ney Tools.

    The carbide blades are really durable.

    Use it all the time, touch up here and there, oak table top earlier this week, skirting boards...

    There is another (625 Ergo) which takes smaller, shaped (round, pear, triangular) blades, excellent for mouldings.
    Attached Images Attached Images

  7. #7
    Join Date
    Nov 2011
    Location
    Adelaide
    Posts
    10

    Default

    The other suggestion I would make is to try an open weave abrasive - like Mirka Abranet P60. you can pick out the clogging if it happens, with a. bradawl...

    mirka.jpg

  8. #8
    Join Date
    Apr 2016
    Location
    Mooroopna, Victoria, Australia
    Age
    34
    Posts
    33

    Default

    Paint stripper does a good job too.

  9. #9
    Join Date
    Jan 2003
    Location
    Osaka
    Posts
    346

    Default

    Quote Originally Posted by paulbuchanan View Post
    Trying to clean off paint on a caustic dipped door but even 40 grit disc clog up straight away. Any suggestions?
    40 is grinding, not sanding. Do not recommend, way to aggressive..
    Semtex fixes all

  10. #10
    Mobyturns's Avatar
    Mobyturns is offline In An Instant Your Life Can Change Forever
    Join Date
    Jul 2012
    Location
    "Brownsville" Nth QLD
    Age
    66
    Posts
    385

    Default

    Caustic baths, "chemical" / "natural" paint strippers, heat guns are used to soften the old paint. Soft paint and power sanding is not a great combination as you have found out. Hand stripping with a "paint scraper" is the only way to go. The traditional "Skarsten No 62" is my preference as the blades can be resharpened & are easily replaced plus the two handed design allows you to get physical without risking wrist injuries.
    Mobyturns

    In An Instant Your Life CanChange Forever

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •