Results 1 to 7 of 7
Thread: Formwork
-
22nd November 2005, 10:48 AM #1Novice
- Join Date
- Jun 2005
- Location
- Qld
- Posts
- 14
Formwork
OK, I am probably not using the right terms here but just wondering if there is an average sq m cost you can work with... for laying the steel formwork for our extension (excl. materials). We have had a few quotes and they vary considerably. I've had a look at Archicentre and can't see anything specific to this.
Any help would be greatly appreciated. Thanks. Cheers
-
22nd November 2005, 05:54 PM #2SENIOR MEMBER
- Join Date
- Aug 2005
- Location
- Victoria
- Posts
- 412
What sort of formwork are you referring to??????suspended slab,edge beams,bondeck??????
Tools
-
22nd November 2005, 06:04 PM #3Novice
- Join Date
- Jun 2005
- Location
- Qld
- Posts
- 14
Hi Tools
Sorry, I guess I'm not good with the terms or explaining myself :confused: . I'm referring to the steel formwork for a concrete slab.
Thanks.
-
22nd November 2005, 06:31 PM #4Hammer Head
- Join Date
- Jan 2005
- Location
- Sydney
- Posts
- 191
When u say steel do u mean bond deck that gets left in place once the concrete is poured.l also how high is it off the ground, how many m2 what ths go for edge boards, set downs and beams.
-
22nd November 2005, 07:25 PM #5Novice
- Join Date
- Jun 2005
- Location
- Qld
- Posts
- 14
Hi Gaza
Sorry for the vagueness... I'm told total area 22 sqm, footings are 350 x 350... slab thickners are 330 x 350 and slab thickness is 100.
Many thanks.
-
22nd November 2005, 08:56 PM #6SENIOR MEMBER
- Join Date
- Aug 2005
- Location
- Victoria
- Posts
- 412
Are you talking about the reinforcement? If you are referring to forming up the perimeter of the slab and rebate ,the concreter will do it in a couple of hours,and the cost is minimal.
-
23rd November 2005, 10:00 AM #7Novice
- Join Date
- Jun 2005
- Location
- Qld
- Posts
- 14
Yes, I am referring to the steel mesh reinforcement .
I've just been given an all inclusive quote (with concrete) of $150 sq m which I think sounds about right.
Similar Threads
-
Yellow substance on formwork timber beams
By eng_kuchev in forum FINISHINGReplies: 5Last Post: 7th September 2005, 12:07 AM -
Concrete Footings...Is there a better way?
By Flyboy in forum CONCRETINGReplies: 38Last Post: 4th September 2005, 06:19 PM -
Your opinion on black formwork plywood in kitchens
By Ben Dono in forum KITCHENSReplies: 5Last Post: 16th January 2004, 08:33 AM
Bookmarks