



Results 1 to 10 of 10
Thread: Hi there from Sydney
-
24th June 2020, 09:56 PM #1
Hi there from Sydney
Just introducing myself here. Based in Telopea, near Parramatta. I've been tinkering with wood for a long time but only recently started to try to learn to use my hand tools and take some care over what I make.
I started with the impulse purchase of a lathe on ebay. I might post more about that later. It's been rewarding learning to use it but I've hit some of its limitations.
Then I started looking at all the scraps of wood that I've kept over the years and realised that I've never actually made anything with them, at least nothing worthwhile. So I made a set of drawers for the workshop using as many scraps as I could - looks ugly but very functional and I learned a little bit about joining wood together.
I've now set out on the endless path of acquiring new (hand) tools and learning to use them to make real projects. My first is a little side-table using dovetail joints and some beautiful timber (rock maple and damanu) which came up quite nicely.
IMG_20200526_184241.jpg
I'm now trying my hand at a small box and learning more as I get into the project.
Look forward to some useful advice and discussion on here - it's been a great resource already.
Steve
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 , 1
-
25th June 2020, 10:00 AM #2
Welcome aboard Steve from just down the road at Ryde. The dovetails look good!
Cheers
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 , 0
stevecassidy thanked for this post
-
26th June 2020, 07:08 PM #3
Welcome to the forum Steve.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 , 0
stevecassidy thanked for this post
-
26th June 2020, 11:15 PM #4
Welcome.
-
26th June 2020, 11:51 PM #5
Welcome to our world
The person who never made a mistake never made anything
Cheers
Ray
-
27th June 2020, 01:19 AM #6
Welcome to the forum.
Regards
Keith
-
27th June 2020, 07:58 AM #7
Welcome to the club.
-
27th June 2020, 04:40 PM #8
G'Day & Welcome to a top forum "Steve".
There are quite a stack members cross the Australia and the world.....
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
Enjoy the forum......
Enjoy your woodwork......
Cheers crowie
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 , 0
stevecassidy thanked for this post
-
5th July 2020, 10:14 PM #9
Welcome Steve....
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 , 0
stevecassidy thanked for this post
-
6th July 2020, 06:52 AM #10
Welcome to the forum
Similar Threads
-
Hello from Sydney
By Monty85 in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 5Last Post: 30th July 2013, 11:47 PM -
G'day from Sydney
By Chippy Dave in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 6Last Post: 26th July 2012, 04:40 AM -
New from SW-Sydney.
By Kwaka_Chris in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 7Last Post: 14th November 2010, 05:34 PM
Bookmarks