Results 1 to 10 of 10
Thread: Hi everyone!
-
10th November 2019, 08:48 AM #1
New Member
- Join Date
- Nov 2019
- Location
- Darwin
- Age
- 33
- Posts
- 1
Hi everyone!
Hi! I'm Jess.
I am new here and in the world of wood turning.
I dont have a Lathe yet as I want to start with a second hand one to see how I go and get the basics before I can put a proper budget for me on it.
Problem is I don't find any second hand wood turning lathe in my area.
I'd like to find a teacher as well to get the basics.
Does anyone live in Darwin NT area?
I live in Girraween and I read on a australian woodturners group that everyone in Darwin hide in here
I can't wait to start wood turning and learn to know you guys.
Have a beautiful Sunday!
Cheers
-
10th November 2019, 09:13 AM #2
GOLD MEMBER
- Join Date
- Nov 2011
- Location
- Melbourne
- Posts
- 1,184
Hi Jess,
Welcome to a great forum,
Keep searching for wood turning clubs an keep reading .
Cheers Matt,
-
10th November 2019, 04:37 PM #3
Life's Good, Enjoy each new day & try to encourage
- Join Date
- Dec 2009
- Location
- Faulconbridge, Lower Blue Mountains
- Age
- 68
- Posts
- 2,576
G'Day & Welcome to a top forum "Jess".
There are a few members in NT plus the rest of the country.....
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
Enjoy the forum.
Enjoy your woodwork.
Cheers crowie
-
10th November 2019, 05:28 PM #4
GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 69
- Posts
- 1,570
Welcome to the forum Jess.
-
11th November 2019, 12:17 AM #5
SENIOR MEMBER
- Join Date
- Jul 2004
- Location
- Adelaide
- Age
- 77
- Posts
- 425
Welcome to the forum.
Regards
Keith
-
11th November 2019, 04:45 AM #6
GOLD MEMBER
- Join Date
- May 2011
- Location
- FRANCE
- Age
- 59
- Posts
- 1,892
welcome aboard
-
11th November 2019, 10:09 AM #7
New Member
- Join Date
- Nov 2019
- Location
- Darwin
- Age
- 33
- Posts
- 1
Originally Posted by old1955
Originally Posted by KeithP
Thanks everyone!!! I'll post photos of my work as soon as I start ^^ Originally Posted by JJF
Have a great week
-
11th November 2019, 10:55 PM #8
Senior Member
- Join Date
- Jul 2008
- Location
- geelong
- Posts
- 72
Stay away from the weak hollow tube framed units, My current one is from presumably some kinda engineering student. Great head #2 morse taper similar on tail stock. Needs a better bed -3mm x25 x25 Obviously what was there. But thicker better.
-
16th November 2019, 10:39 PM #9
On a journey
- Join Date
- Oct 2008
- Location
- Leopold, Victoria
- Age
- 66
- Posts
- 1
Welcome to the forum Jess. We have one member on here from Darwin but he hasn't been on since Feb this year but you could always try PM'ing him to see if you can make contact. He is Rum Pig and what I know of him he is mainly into pen turning.
Dallas
-
19th November 2019, 10:46 AM #10
SENIOR MEMBER
- Join Date
- Feb 2018
- Location
- Victoria, Australia
- Age
- 70
- Posts
- 58
Hi and welcome Jess. Hope you enjoy your stay. Can't wait to see some of your work!
Reply With Quote
Bookmarks