Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 1
Results 1 to 5 of 5
Thread: Hi Guys From Perth!
-
31st January 2019, 10:54 PM #1
New Member
- Join Date
- Jan 2019
- Location
- Perth
- Posts
- 0
- Post Thanks / Like
Hi Guys From Perth!
Hi Guys,Brand new to this forum, and getting into some wood work after years of fabrication with steel.Could anyone help me find a suitable section for me to post a questions relating to glues to use on a mortise and tenon gate I am building?90x42 frame out of Design Pine, and 11mm lining board infill in a Hamptons shaker design. (Photos attached) We don't get the 65mm x90 or the 19mm lining boards unfortunately in WA.I was suggested to just use Liquid Nails (Yellow Tube) in the joins and clamp, but have also seen the red tube extreme liquid nails or even the sika Pro that has all the qualities I`ve read you need in a gate glue joint.Any help would be great!Cheers,HamishPerth
-
Post Thanks / Like - 0 Thanks, 0 Likes, 0 , 1
-
1st February 2019, 02:24 PM #2
GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 69
- Posts
- 1,570
- Post Thanks / Like
Welcome to the forum Hamish.
Ross
-
1st February 2019, 10:26 PM #3
SENIOR MEMBER
- Join Date
- Jul 2004
- Location
- Adelaide
- Age
- 77
- Posts
- 425
- Post Thanks / Like
Welcome to the forum.
Regards
Keith
-
2nd February 2019, 01:35 AM #4
GOLD MEMBER
- Join Date
- May 2011
- Location
- FRANCE
- Age
- 59
- Posts
- 1,892
- Post Thanks / Like
Welcome to the forum
-
11th March 2019, 07:46 PM #5
Life's Good, Enjoy each new day & try to encourage
- Join Date
- Dec 2009
- Location
- Faulconbridge, Lower Blue Mountains
- Age
- 68
- Posts
- 2,576
- Post Thanks / Like
G'Day & Welcome to a top forum;
There are quite a few members around Perth and cross South West plus the rest of the country.....
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
Enjoy the forum.
Enjoy your woodwork......
Cheers crowie
PS - Watch out for local forum members get togethers to met up with and network....
Reply With Quote
Similar Threads
-
G'day guys
By fhdkhl in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 3Last Post: 2nd December 2017, 12:38 AM -
GOING TO: Perth - Melb and Perth - Brisbane
By BobL in forum MEMBERS TRANSPORTReplies: 0Last Post: 31st August 2011, 10:22 AM -
hey guys
By jordan4 in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 6Last Post: 8th May 2011, 06:37 PM
Bookmarks