Results 1 to 4 of 4
  1. #1
    Join Date
    Feb 2018
    Location
    Melbourne
    Posts
    1

    Default Decking over Concrete

    We have an Alfresco area in our new house. Due to an issue with the surface at handover (mortar has been left on the floor), the builder has offered us an epoxy be layed.
    Our aim was to always maybe deck the area. We had considered asking the builders to put the money of an epoxy layer into the cost of decking the area.

    My question is, if I am to get a deck putdown on concrete, is there some sort of anti mold put on the concrete?
    My concern is as time goes on, if food or drink (3 young kids) is spilt, will it begin to smell as it would not dry quickly due to it being undercover?

    Not sure if my concerns are unrealistic

  2. #2
    Join Date
    May 2012
    Location
    Woodstock (Cowra)
    Age
    75
    Posts
    832

    Default

    Eventually dirt etc will get in there and accumulate which will hold moister etc, results: rotted timber/dry rot, fungi growth

    You have to maintain the ability for water to escape and dry out

    I assume that you only have a max of 100mm difference in height internal to external

    The builder is offering the best possible solution, it is his legal responsibility to rectify which sounds like he is willing to do

    If you want a timber look, negotiate with the builder for a composite material faux timber deck such as
    https://www.ekologix.com.au/
    The person who never made a mistake never made anything

    Cheers
    Ray

  3. #3
    Join Date
    May 2013
    Location
    Rockhampton QLD
    Age
    69
    Posts
    1,570

    Default

    Welcome to the forum.

  4. #4
    Join Date
    Mar 2015
    Location
    Melbourne, Vic, Australia
    Posts
    36

    Default

    I built my 80-90sqm deck over concrete that I poured beforehand, precisely to avoid soil sitting damp beneath the deck and to stop weeds etc from growing up through it. I had a minimum of 100mm beneath the bottom of the boards and this allower me to leave a 10-40mm gap under the bearers/joists to allow for drainage and airflow. I used 35x120mm decking boards and left a good 7-8mm between boards for expansion and airflow. It's been 2 years and haven't had any issues. No smells, or damp etc.

    Cheers, Dom

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •