Results 1 to 8 of 8

Thread: G'Day

  1. #1
    Join Date
    Nov 2007
    Location
    Melbourne
    Posts
    10

    Default G'Day

    G'Day,

    I've been lurking for a while, and finally thought I'd say hello.
    I've been living in a one bedroom apartment in the city for the last 5-6 years now, and haven't had any space for woodworking, but I've had a space open recently and I've invested in some Japanese saws and a chisel set!

    The first project is a bench. I'm jumping into the deep-end with my own version of the roubo bench. Mortise + Tenon all round and through tenons. Lots of firsts here.

    bench.jpg

  2. #2
    Join Date
    May 2010
    Location
    Bendigo
    Posts
    62

    Default

    Looking forward to seeing that develop Mark

    What sort of timber are you going to use?

    Oh, welcome too

  3. #3
    Join Date
    Nov 2007
    Location
    Melbourne
    Posts
    10

    Default

    The budget allows for pine at the moment.
    so I've got 90x90 frame, and the top will be laminated 45x90 (90 high).

    I'm not going to glue the top down though, with the thinking that in a few years when it gets a tired, I'll replace it with a harder timber.

    I'll post some progress pics as the build progresses

  4. #4
    Join Date
    May 2010
    Location
    Bendigo
    Posts
    62

    Default

    Cool, that's the way I started off too, still the same now though

    I made the frame so that it was knock down. Each end frame is glued but the stretchers can unbolt. Instead of top stretchers I used a piece of formply then the two top slabs, so mine's not a Roubo style, but has a tool well in centre.

    Looking forward to seeing what you end up with.

  5. #5
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    2,576

    Default

    G'Day & Welcome to a top forum "Mark".
    There are a stack members across the Melbourne area, quite a few in country Victoria plus lots more across the rest of the country & the world.....
    You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
    Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
    Enjoy the forum.
    Enjoy your woodwork......
    Cheers crowie

    PS _ Keep an eye out on the forum for Melbourne Get Togethers as a great way of meeting like minded folk....
    Also the Melbourne Wood Show is in September...

  6. #6
    Join Date
    Nov 2007
    Location
    Melbourne
    Posts
    10

    Default

    Bendigo Bob, I'm glad I'm on the right track

    Thanks for the welcome Crowie.
    Looking forward to the Wood Show in Sept. And I'll be sure to post the build as it's progressing. It's slow progress, especially since my workshop is 30 minute drive away from where i live in the city.

    But hope to get down there most weekends.

    Stay tuned.

  7. #7
    Join Date
    May 2013
    Location
    Rockhampton QLD
    Age
    69
    Posts
    1,570

    Default

    Welcome to the forum Mark.

  8. #8
    Join Date
    May 2011
    Location
    FRANCE
    Age
    59
    Posts
    1,892

    Default

    Welcome aboard Mark

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •