Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 14 of 14

Thread: Lino

  1. #1
    Join Date
    Sep 2005
    Location
    harbord
    Posts
    10
    Post Thanks / Like

    Default Lino

    I did a search on all the topics, but none really helped me.

    I would like to lay some funky lino in the kitchen (very small kitchen). I know nothing about how to do this, but the kind man at Bunnings gave me heaps of information, my question is: Do I have to rip up the existing lino or can I lay over the top of it? (I'm a little scared to see what's under it!)

  2. #2
    Join Date
    Aug 2003
    Location
    Melbourne - Outer East Foothills
    Posts
    1,557
    Post Thanks / Like

    Default

    You're talking vinyl I assume ? If it's flat then no probs. If the existing stuff has a raised pattern it may be better to rip it up. That wouldn't be hard to do unless it's been glued directly to the floor like it was at my place. It took weeks with a heat gun and scraper to get it off but we had no choice since hardwood floors were going down and they don't stick to the vinyl.
    If at first you don't succeed, give something else a go. Life is far too short to waste time trying.

  3. #3
    Join Date
    Jan 2004
    Location
    Over there a bit
    Age
    18
    Posts
    503
    Post Thanks / Like

    Default

    I'll go one further, even if it's a little textured I reckon it would be Ok.
    Boring signature time again!

  4. #4
    Join Date
    Nov 2004
    Location
    Melbourne
    Posts
    74
    Post Thanks / Like

    Default

    I would rip up the old stuff, considering it is a small area, also, if you come accross a problem, any chance you could just lay some masonite over the old stuff...or would it come too high.
    But thinking when I pulled up the old lino in the bathroom, there was the old stuff underneath...so maybe just lay in over the top.

  5. #5
    Join Date
    Sep 2005
    Location
    harbord
    Posts
    10
    Post Thanks / Like

    Default

    Thanks so much for all your help. This is a great board - giving me lots of ideas! I think I'll just lay it over the existing which is in fine condition, albeit a little ugly.

    Thanks again!

  6. #6
    Join Date
    Aug 2003
    Location
    Melbourne - Outer East Foothills
    Posts
    1,557
    Post Thanks / Like

    Default

    Quote Originally Posted by beej75
    the existing which is in fine condition, albeit a little ugly.
    Like my missus
    If at first you don't succeed, give something else a go. Life is far too short to waste time trying.

  7. #7
    Join Date
    Sep 2004
    Location
    Sydney
    Age
    42
    Posts
    103
    Post Thanks / Like

    Default

    should always do it properly or not at all!

    Take it all the way down to the subfloor and lay it on there with an underlay and perhaps floor sheeting if need be!

  8. #8
    Join Date
    Aug 2005
    Location
    W.A.
    Posts
    1
    Post Thanks / Like

    Default

    I agree with puppypaw ( unless its a quickfix to flog the place off ) A job worth doing is a job worth doing properly
    Quote Originally Posted by PuppyPaw
    should always do it properly or not at all!

    Take it all the way down to the subfloor and lay it on there with an underlay and perhaps floor sheeting if need be!

  9. #9
    Join Date
    Sep 2005
    Location
    harbord
    Posts
    10
    Post Thanks / Like

    Default

    Thanks again, but it's just a quick fix to 'flog the place off'.

    B

  10. #10
    Join Date
    Nov 2004
    Location
    tasmania
    Age
    61
    Posts
    154
    Post Thanks / Like

    Default

    What a small www sis . Why didn't you phone me and ask ? Fancy meeting you here . This has got to be one of those Twilight zone things . DoDoDoDo .

    Love you
    Rick

  11. #11
    Join Date
    Aug 2003
    Location
    .
    Posts
    4,816
    Post Thanks / Like

    Default

    Quote Originally Posted by PuppyPaw
    should always do it properly or not at all!

    Take it all the way down to the subfloor and lay it on there with an underlay and perhaps floor sheeting if need be!
    Down to the sub floor?? :eek:
    What, joist and bearers??

    Al :confused:

  12. #12
    Join Date
    Sep 2004
    Location
    Sydney
    Age
    42
    Posts
    103
    Post Thanks / Like

    Default

    Quote Originally Posted by ozwinner
    Down to the sub floor?? :eek:
    What, joist and bearers??

    Al :confused:
    yes sub floor down to either the concrete base, the wooden floor boards, the plywood. what ever was originally laid down to act as the floor.

    did I use the wrong terminology???

  13. #13
    Join Date
    Sep 2005
    Location
    harbord
    Posts
    10
    Post Thanks / Like

    Default

    Thanks everyone, including Daggy - but I managed to lay it.... It looks tops, I just have to finish the edging....

    B

  14. #14
    Join Date
    Jul 2004
    Location
    bundaberg
    Age
    63
    Posts
    0
    Post Thanks / Like

    Thumbs down lino and asbestos

    Just to give you all some advice before your next reno, get someone to look at your lino, not too many people know that old lino and vinyl flooring was manufactured with asbestos, so think twice before going like a bull at a gate and ripping it up, you lungs will thank you.

Similar Threads

  1. Removing disintegrated lino goo
    By lloyd in forum FLOORING, DECKING, STUMPS, etc.
    Replies: 6
    Last Post: 14th July 2005, 08:02 AM
  2. Damage from lino removal on top of Fed table
    By Thomidog in forum FINISHING
    Replies: 2
    Last Post: 27th May 2005, 12:11 AM
  3. Do it yourself lino laying?
    By kiwigeo in forum FLOORING, DECKING, STUMPS, etc.
    Replies: 10
    Last Post: 29th March 2005, 10:34 PM
  4. Replies: 15
    Last Post: 9th September 2004, 10:01 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •