Results 1 to 1 of 1
-
6th March 2015, 09:30 AM #1
Dead fridge required for odd application
Hi all,
I'm looking for a single door fridge with internal dimension:
width 540mm (might be a bit wider);
depth 610mm (might be a bit dipper);
height in a range of 1000mm - 1800mm.
I need it without compressor. Basically I'm looking for an air-tight cabinet. I was thinking about commercial drink/display kind-of fridge, you know, with glass door. Glass door is not a requirement though.
So it need to be dead/degassed. Wheels sounds like nice to have addition.
Any idea how to hunt it down?
In case you are curios. I have a communication cabinet with my home server/network stuff in there. This cabinet located in my garage. I made it air-tight sort-of. There is sufficient air-flow for server ventilation/cooling. It's filtered and pushed from the bottom and pulled from the top by bunch or server fans. I also maintain positive air pressure to keep dust out. It's all working as designed, but ... The door sealing is coming off and need to be
replaced every couple years (because communication cabinet is not designed for this); space for filters is not sufficient to install bigger filters and accessing them for cleaning is hard; filters located too low and suck dust and dirt from the floor; and it's noisy. So I thought the fridge is the kind of cabinet that address half of these problems and I can just put the guts (rack rails) of the telecom cabinet into the dead fridge, cut out top and bottom for fans and put big filter at the bottom.
If I put it into wrong forum, please help me to move it into more appropriate place.
Read the full thread at RenovateForum.com...
Similar Threads
-
Oil Application
By Bushmiller in forum FINISHINGReplies: 12Last Post: 24th June 2011, 11:41 PM -
EEE application??
By DoubleD in forum FINISHINGReplies: 9Last Post: 15th August 2006, 09:02 AM -
EEE Application
By Mmcbain in forum FINISHINGReplies: 2Last Post: 10th October 2004, 10:20 AM
Bookmarks