Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
8th January 2015, 07:10 PM #1
Glueing Hardwood Veneer to Wooden Door Core
Hi, I started a thread over in the Renovate Forum concerning the best product to glue hardwood veneer to a solid western red cedar core door. Here is a link to the thread if anyone can offer some advice... Sorry, I'm not sure on the etiquette of cross-posting and the like
The first step towards knowledge is to know that we are ignorant.
-
8th January 2015, 08:33 PM #2
My two cent's worth:
I'd be worried about movement in all those slats; this could potentially cause the door to warp over time as you'd have an unbalanced laminate.
How thick are you going to make the slats? More than a few mm could be troublesome.
If you did the slats at maybe 5mm thickness, I'd glue them to the door (with epoxy) then make a few cuts (at veneer thickness depth) across the door and fill the gap with Sikaflex 290 (boat deck caulking) for a bit of wiggle room if the timber moves. (you could leave gaps while gluing the door up, if you wanted to do a section at a time).
-
9th January 2015, 08:15 AM #3
Thanks for the reply Splinter. I was thinking of making them about 5mm thick but had not thought about warping/expansion issues.
The first step towards knowledge is to know that we are ignorant.
Similar Threads
-
Door Jam width for a Solid Core Door
By SkyHook in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 2Last Post: 15th May 2008, 07:33 PM