Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
5th August 2014, 07:56 PM #1
Turns wood into heating..
- Join Date
- Apr 2003
- Location
- Canberra
- Age
- 51
- Posts
- 0
Teknatool Nova DVR-XP lathe, stand and accessories.
Apologies if I have set this up wrong, first listing and trying to get my head around it
Hi Folks,
I used to be a regular contributor to the woodturning forums but I fell out of the hobby some years ago and now life's events dictate I start unloading some stuff.
This Teknatool lathe actually started it's life as a DVR-3000 but I had the head stock replaced under warranty (bearings) and was given the DVR-XP. Since replacement it only did light work like pens and small bowls. I wouldn't have used it for long before gathering dust and if anyone can tell me how to get the total operating hours out of it I will but I couldn't think it would be more than 50-100 hours - best guess on an ailing memory.
Includes:
- DVR-XP Lathe
- Supernova2 Chuck and stock jaws
- 100mm jaws
- 25mm jaws
- Pin jaws
- 50mm faceplate
- 100mm faceplate (not pictured)
- live centre
$2,350 ono
Pickup only from Canberra
woodworkgear-8.jpg woodworkgear-10.jpg woodworkgear-9.jpgToasty
"The knack of flying is in learning how to throw yourself at the ground and miss."
-
11th August 2014, 11:10 AM #2
Turns wood into heating..
- Join Date
- Apr 2003
- Location
- Canberra
- Age
- 51
- Posts
- 0
Still available
Toasty
"The knack of flying is in learning how to throw yourself at the ground and miss."
-
16th August 2014, 10:44 AM #3
Turns wood into heating..
- Join Date
- Apr 2003
- Location
- Canberra
- Age
- 51
- Posts
- 0
Toasty
"The knack of flying is in learning how to throw yourself at the ground and miss."
