Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
21st April 2014, 06:34 PM #1Senior Member
- Join Date
- Aug 2012
- Location
- Banora point,NSW.
- Posts
- 4
Woodturning Lathe For Sale, 1 metre bed, swivel head, inc faceplate, chuck and jaws
Selling my lovely old lathe due to upgrading to Variable Speed. Lathe located in Banora Point, NSW, 2486.
Made by Axminster Uk, bought in the late Nineties. 3/4 Hp motor, 1 metre bed length, gap bed by headstock, swivel head to allow maximum diameter, expanding pulley system for speeds approx 450-2500 rpm. Own cabinet stand in steel, includes shelf and cupboard.
Also includes a four jaw scroll chuck with Four jaw sets inc Pin Jaws, tommy bars, Morse taper adaptor (2MT), and woodworm screw.
Also includes a drive centre, live centre, knock out bar, spanner for headstock and two faceplates.
You will need to buy a new belt, 50mm shorter than the one fitted.
Price $300
002small.JPG003small.jpg005small.jpg006small.jpg007small.JPG