Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
22nd January 2014, 04:40 PM #1GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 2,574
Need part for my Align-A-Rip fence
Hi. I have one of those align-a-rip fences like shown below. The problem is I broke the little white plastic pad which presses up against the rail when you tighten the fence. Does anyone know where I can purchase a replacement?
If not, would someone who owns one of these mind measuring the thickness of the plastic? I've lost the broken bits and may need to make a replacement so would like to know the original thickness.
cheers and thanks
Arron
fence.jpgApologies for unnoticed autocomplete errors.
-
24th January 2014, 07:13 PM #2
Fence part
Arron,
I think Gary Pye sells these fences. If it is the one in this photo , it is 3mm thick
pker.rip fence.jpg
-
24th January 2014, 09:45 PM #3SENIOR MEMBER
- Join Date
- Feb 2012
- Location
- Rosslyn Park, Adelaide
- Posts
- 165
Carbatec also sell these and parts. I purchased the same part recently. It took a little perseverance as initially they couldn't find it in their parts list. On a re-visit a few weeks later a different staff member found it fairly quickly and I had it within a week.
I also bought replacement nylon rubbing pads and found them all cheaper than thought.
Regards
Bauldy
-
25th January 2014, 07:05 AM #4GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 2,574
Ok, done now. Thanks Bauldy and Pker
Cheers
ArronApologies for unnoticed autocomplete errors.