Big Problem with Huanyang VFD + 1.5Kw Water cooled spindle

[focus180]

i buyed the Huanyang VFD + 1.5Kw Water cooled spindle ; if i leave Pid 001 and 002 to zero ( manual control ) the spindle funcion withou problem

but if i set Pid 001 and 002 to two ( remote control with Mac3 ) with usb cable RS485-USB when I just try to start the spindle there is a click & the estop starts flashing

can someone hel me to solve the problem ?

thanks

[seafurymike]

Focus,

Can you provide more details.

1. What are you using to control the RS485 from your PC.
2. What type of adapter are you using for your RS485

[focus180]

thanks for your help


1 - I use Artsoft Mach3 Version R3.043.066
2 - i use an adapter RS485-USB buyed on ebay like the one attached

I have configured the driver for the adapter and install the plugin that i found here http://royaumedeole.fr/informatique/...-huanyang-vfd/ ;
infact when i open the Mach3 the software confirm with a pop-up that "Configuration ok - spindle speed 3000 rpm at 50 Hrz" .
When i press F5 to start the spindle there is a click from the VFD and the estop of Mach3 starts flashing.
.