Results 1 to 4 of 4
  1. #1
    Join Date
    Aug 2009
    Location
    act
    Posts
    1

    Default how to finish Jarrah.

    Hi,
    I am making some shelves with solid timber (leftovers from my floor). I've sanded the shelves with 80 then 170 sandpaper by hand and the powered sander. Not sure what to do next because I've googled for staining jarrah and people say 'let nature does it job' and not to stain jarrah. Is it oil that I should apply to the timber then vanish as the last coat? Also, after sanding, do I need to wipe off the dust with cloth? Can't seem to find this info anywhere. Thanks.

  2. #2
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    Here's the best guide for jarrah....

    damnfinefurniture

  3. #3
    Join Date
    Jun 2003
    Location
    Sunbury, Vic
    Age
    85
    Posts
    632

    Default

    I agree with Master Splinter.

    Jarrah should not need staining and will only spoil it anyway.
    Tom

    "It's good enough" is low aim

  4. #4
    Join Date
    Feb 2012
    Location
    Nowra, NSW, Australia
    Age
    66
    Posts
    0

    Default

    As soon as you put any finish on Jarrah, it will go pretty dark anyway, so stain should be unnecessary.

    Always wipe off dust after sanding and before applying a finish, with a cloth moistened with water, which will raise the grain, or with white spirits, which won't. For some oily timbers, acetone is best.

    Jarrah will take any standard finish - oil, poly, lacquer, wax etc. That bit's up to you and the type of finish you wish to achieve. For example, the dark timber at the rim of this pencil holder is Jarrah, finished with wipe-on poly.
    Attached Images Attached Images
    ... Steve

    -- Monkey see, monkey do --

Similar Threads

  1. Vic Ash and Jarrah. best finish?
    By timberpassion in forum FINISHING
    Replies: 10
    Last Post: 19th January 2009, 07:04 PM
  2. Jarrah finish
    By GJB in forum FINISHING
    Replies: 3
    Last Post: 22nd October 2008, 05:20 PM
  3. finish for a jarrah bar?
    By gpsmith in forum FINISHING
    Replies: 7
    Last Post: 10th April 2006, 01:16 AM
  4. When to Finish Jarrah
    By Tex B in forum FINISHING
    Replies: 10
    Last Post: 20th December 2005, 08:01 PM
  5. Best finish for Jarrah
    By SteveH in forum FINISHING
    Replies: 11
    Last Post: 19th December 2002, 10:48 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •