Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: From Black to Oak
-
16th April 2005, 10:32 PM #1
Intermediate Member
- Join Date
- Nov 2004
- Location
- Newcastle NSW
- Posts
- 0
- Post Thanks / Like
From Black to Oak
Have a satin black lacquer finished buffet which I would like to refinish in an oakish mid brown tone.
Unfortunately this unit has been maintained with Handy Andy which I believe has silicone in it.
Any suggestions about how to successful seal and refinish will be greatly appreciated
Regards
Barry
-
17th April 2005, 08:00 PM #2
SENIOR MEMBER
- Join Date
- Feb 2003
- Location
- Garvoc VIC AUSTRALIA
- Posts
- 3,208
- Post Thanks / Like
Start by stripping it with a good sharp scraper and paint stripper.
Shouldnt be any handy andy left after its stripped.
-
18th April 2005, 10:13 PM #3
Intermediate Member
- Join Date
- Nov 2004
- Location
- Newcastle NSW
- Posts
- 0
- Post Thanks / Like
Thanks Bob
Was hoping to get an easyfix method of sealing the current finish and recoating over it. The unit is quite serviceable but the material is not worth a lot of work
By the way the cleaner used was Mr Sheen
regards
Barry
-
23rd April 2005, 10:30 AM #4
SENIOR MEMBER
- Join Date
- Jan 2002
- Location
- Sunshine Coast, Qld
- Posts
- 117
- Post Thanks / Like
The only way I know to turn black to brown is strip and refinish or use brown paint.
Rusty
Reply With Quote
Bookmarks