Results 1 to 13 of 13
  1. #1
    Join Date
    Mar 2004
    Location
    Victoria
    Posts
    43

    Thumbs up advice re tinnie

    Asking this question for a friend ( I dont know the answer)

    He has just bought a second hand tinnie, used it just once and when he got back emptied it of water and got about 1 and a half buckets of water after about 3 hours boating. He looked at the bung/plug (whatever) and noticed that the red washer part was broken, could this be the cause, or if no more gets in just leave it. Alternatively how can you find a leak. He realises being a tinnie he will get water in it, but his wife wont go with him untill he finds out

    Thank you

    John Macklin

  2. #2
    Join Date
    Nov 2003
    Location
    Australia and France
    Posts
    2,869

    Default

    Could be the problem!

    To find out, put the bung in,leave it on the trailer and fill the boat with water up to the waterline.

    Follow where the drips are coming from.

    Cheers,

    P (water diviner)

  3. #3
    Join Date
    May 2003
    Location
    South Oz, the big smokey bit in the middle
    Age
    68
    Posts
    1,914

    Default

    Buy a new bung - they're dirt cheap (guess how I know that one).

    The leaks could be elsewhere of course - cracks in the ally for one. You can find these by drying the inside, sprinkling power around the inside (unscented unless you want you mates bringing pink bubbly rather than amber bubbly next time you take them fishing :eek: ), and then floating it. You'll soon see were even small leaks are by the powder turning wet.

    If the boat has rivets, you might just have to get them retightened. My tinny, when I had it, had the seats riveted in. The previous owner told me that she'd had them tightened to stop leaks. Certainly, the boat didn't leak once I'd replaced the dicky bung.

    And there's no need for a tinny to be a wet boat - mine wasn't and she had the low freeboard of a river boat, whereas I used it in the sea ... well, until the water got a bit choppy, then she became a wet boat.

    Cheers
    Richard

  4. #4
    Join Date
    Mar 2004
    Location
    Victoria
    Posts
    43

    Default tinnie

    thank you both, he has bought a new bung just in case will give both a try

    thanks

  5. #5
    Join Date
    Oct 2002
    Location
    Tin Can Bay, Queensland, Australia
    Age
    72
    Posts
    64

    Default

    And if your gettin wet feet take the bung out once you are going along at a reasonable pace and the water will disappear. Just remember to put it back in before you stop.

    DAMHIKT
    Perhaps it is better to be irresponsible and right, than to be responsible and wrong.
    Winston Churchill

  6. #6
    Join Date
    Mar 2005
    Location
    Too close to Sydney
    Posts
    133

    Default

    John Macklin said "but his wife wont go with him untill he finds out"

    So why does he want it fixed?

  7. #7
    Join Date
    May 2003
    Location
    South Oz, the big smokey bit in the middle
    Age
    68
    Posts
    1,914

    Default

    Quote Originally Posted by boban
    John Macklin said "but his wife wont go with him untill he finds out"

    So why does he want it fixed?
    That's why you are required to carry that bucket. New comers to the sport tend to imagine you use it to get water OUT of the boat but, when cruising back to the dock and the missus is wondering how much fun you had ...

    Cheers
    Richard

  8. #8
    Join Date
    May 2003
    Location
    Melbourne, Victoria
    Age
    50
    Posts
    641

    Default

    Quote Originally Posted by macklin
    his wife wont go with him untill he finds out

    Tell him he's mad if he fixes it. It's the perfect boat.

    Dan
    Is there anything easier done than said?
    - Stacky. The bottom pub, Cobram.

  9. #9
    Join Date
    May 1999
    Location
    Tooradin,Victoria,Australia
    Age
    74
    Posts
    2,515

    Default

    John.

    Check whether any joints have silicon on them. If they have check for corrosion around the join.

    When Silicon became the magic leak-fixer most were ascetic acid cure. Guess what? It can corrode aluminium (why are they called "tinnies" and not "allys") and neutral cure should be used.

  10. #10
    Join Date
    Aug 2004
    Location
    Darwin, Northern Territory
    Age
    48
    Posts
    66

    Default

    If it's a standard welded tinnie, you might want to check along the welds for cracks from knocks and improperly stored trailer carting.
    "Last year I said I'd fix the squeak in the cupbaord door hinge... Right now I have nearly finished remodelling the whole damn kitchen!"

    [email protected]

  11. #11
    Join Date
    Mar 2004
    Location
    Victoria
    Posts
    43

    Default advice re tinnie

    he said he has a pump in the back to get rid of water but did not use it !!!!!!!!
    He also cannot drive the car so he relies on his wife to go with him, and she said I dont go untill you fix it, or you make your own meals whichever comes first. Anyway he could not catch a fish even if he was in the fish market
    When they fish from the bank he gets about 1 and she catches the rest, seems a hopeless situation to me.

    thanks for the replies will pass everything on to him

    John Macklin

  12. #12
    Join Date
    Nov 2003
    Location
    Australia and France
    Posts
    2,869

    Default

    He could just drill a hole in the floor to let the water out.

    P

  13. #13
    Join Date
    May 2003
    Location
    South Oz, the big smokey bit in the middle
    Age
    68
    Posts
    1,914

    Default

    Quote Originally Posted by bitingmidge
    He could just drill a hole in the floor to let the water out.

    P
    Nah, the water runs out much quicker if you turn it upside down.

    Richard

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •